Visual Backs

Showing 1 to 20 of 31 total
Set Ascending Direction
  1. Stellarvue - Low Profile Visual Back for 3" Stellarvue Focusers

    $59.00
    SKU: DCQ3SV

    Available - Typically ships in 1-3 Days

    This is a low profile, 2" threaded visual adapter for use with the 3" Stellarvue focusers. This includes the 3" SV focuser used on the SVQ100 astrographs.

  2. Celestron - Visual Back - 1.25 "

    $34.95
    SKU: CEL-93653-A

    In stock

    This accessory is used to adapt the threads on all Schmidt-Cassegrain models for use with 1.25" accessory items.

  3. JMI - SCT Visual Back Adapter

    $35.00
    SKU: JMI-ADPT2SCTL

    Ships in 3-5 Days

    Adapter for mounting an NGF-S, NGF-SE or NGF-miniS focuser on an SCT with standard 2″ diameter threads. An optional light shield blocks all stray light that may penetrate the focuser bearing cavity
  4. JMI - Large Format SCT Visual Back Adapter- 3" dia. threads, no light shield

    $45.00
    SKU: JMI-ADPT3SCT

    Ships in 3-5 Days

    Non-vignetting adapter for mounting an NGF-S or NGF-SE focuser on a 10″ or larger SCT with 3″ or 4″ diameter threads. An optional light shield blocks all stray light that may penetrate the focuser bearing cavity
  5. JMI - Large Format SCT Visual Back Adapter- 3" dia. threads, includes light shield

    $60.00
    SKU: JMI-ADPT3SCTL

    Ships in 3-5 Days

    Non-vignetting adapter for mounting an NGF-S or NGF-SE focuser on a 10″ or larger SCT with 3″ or 4″ diameter threads. An optional light shield blocks all stray light that may penetrate the focuser bearing cavity
  6. JMI - Large Format SCT Visual Back Adapter- 4" dia. threads, Meade LX200 16" ONLY, no light shield

    $75.00
    SKU: JMI-ADPT4SCT

    Ships in 3-5 Days

    Non-vignetting adapter for mounting an NGF-S or NGF-SE focuser on a 10″ or larger SCT with 3″ or 4″ diameter threads. An optional light shield blocks all stray light that may penetrate the focuser bearing cavity
  7. JMI - Large Format SCT Visual Back Adapter- 4" dia. threads,

    $90.00
    SKU: JMI-ADPT4SCTL

    Ships in 3-5 Days

    Non-vignetting adapter for mounting an NGF-S or NGF-SE focuser on a 10″ or larger SCT with 3″ or 4″ diameter threads. An optional light shield blocks all stray light that may penetrate the focuser bearing cavity
  8. Meade - Eyepiece Holder (1.25 ")

    $25.00
    SKU: MEA-07182

    Ships in 3-5 Days

    Meade Eypeiece Holder #07182. For attaching 1.25" slip fit accessories to the rear cell of any Meade SCT or ACF
  9. Meade - SC Thread to 2 " Accessory Adapter

    $41.95
    SKU: MEA-07085

    In stock

    Meade SC thread to 2" Accessory Adapter 07085 is a telescope accessory for use with Meade LX Telescopes and Meade LX ACF Telescopes. These SC thread to 2" Accessory Adapters by Meade are standard components with all Meade LX400 ACF Telescopes
  10. PetersonEng - EyeOpener 2 " Visual Back - For Meade LX-400, LX200-ACF, LX200GPS, LX-90 & LX200 Classic

    $74.99
    SKU: EYEOPENER

    Out of stock

    An EyeOpener enhances the performance of long focal length 2" eyepieces on Meade 10", 12" and 14" Schmidt-Cassegrain and Advanced Coma-Free telescopes by increasing the eyepiece optical path size as much as 65%
  11. PetersonEng - EyeOpener 2 " Tube Adapter

    $49.99
    SKU: EyeOpenerAdapter

    Out of stock

    This adapter allows the attachment of anything with a 2" tube (such as a standard 2" diagonal) to be attached directly to your Meade SCT without using the microfocuser
  12. Berlebach - 2" Visual Back

    $49.95
    SKU: B500630

    Ships in 3-5 Days

    Berlebach 2" Visual Back accessory for telescopes.

  13. Stellarvue - Low Profile Visual Back for 3" Feather Touch Focusers

    $39.00
    SKU: DCQFT3

    Available - Typically ships in 1-3 Days

    This is a low profile, 2" threaded visual adapter for use with the 3" Feather Touch focuser. This includes all 3" Feather Touch focusers including those made for the first run of SVQ100 astrographs.

  14. Takahashi - 2" Adapter for FSQ85-ED

    $177.00
    SKU: TAK-TKT37110

    Ships in 3-5 Days

    The Takahashi 2" Eyepiece Adapter TOA0401 was designed specifically for the Takahashi FSQ-85ED, but is also needed for the FSQ-106ED-XIII when using a 1.6X Extender. Slides inside exisiting focuser tube to accept all 2" eyepieces and accessories.

  15. PrimaLuceLab - OnAxisLock 31.8mm T2 Visual Back

    $59.00
    SKU: PRI-OAL318

    Ships in 7-10 Days

    The Primaluce OnAxisLock visual backs allow you to lock your equipment into position with a circular clamp rather than traditional holding screws, ensuring an exceptionally secure connection, a perfectly centered position and will leave your accessories scratch-free. This OnAxisLock eyepiece holder is designed to fit 31.8mm threaded telescope backs and offers a T2 connection.
  16. PrimaLuceLab - OnAxisLock 50.8mm M72x1 Takahashi Visual Back

    $69.00
    SKU: PRI-OAL508TAK72X1

    In stock

    This PrimaLuceLab OnAxisLock eyepiece holder is designed to replace the traditional eyepiece holder on Takahashi telescopes using an M72x1 thread and will allow you to insert any 50.8mm diameter accessory. Specially designed to perfectly center your accessories and offer a rigid and secure connection for heavier equipment, the double locking rings were designed to not mar your accessories and be easy to tighten even while wearing gloves.
  17. PrimaLuceLab - OnAxisLock 50.8mm Visual Back for SC Telescopes

    $69.00
    SKU: PRI-OAL508SC

    In stock

    The PrimaLuceLab OnAxisLock 50.8mm visual back for SC telescopes is directly screwed onto the back thread common in most Schmidt-Cassegrain telescopes (like the SC and EdgeHD by Celestron or Meade) and lets you use all the 50.8mm diameter accessories.

  18. Takahashi - Extender-Q 2 " Adapter

    Regular Price: $82.00

    You Pay: $69.70

    SKU: TAK-TKA00596

    Ships in 3-5 Days

    This perfectly machined 2" adapter threads onto the visual adapter section of the Takahashi Extender-Q TEQ0002. The Takahashi Extender-Q allows the use of 2" eyepieces or most 2" refractor star diagonals.

    Out of stock

  19. Takahashi - 2" Compression Ring Adapter for Sky-90/FS-78

    Regular Price: $142.90

    You Pay: $138.00

    SKU: TAK-TOA0060

    In stock

    The Takahashi 2" Compression Ring Adapter for Sky-90 and FS78 OTA. With brass interiors, you can safely insert and use your 2" barrel sized eyepieces in this OTA. Simply attach the compression ring directly to the focuser.

  20. Takahashi - 2 " Compression Ring Adapter for FS-102/128/130/152

    $177.00
    SKU: TAK-TKP27110

    In stock

    This compression ring adapter is a great accessory for FS-102, 128, 130, and 152 optical tube assemblies by Takahashi.

Showing 1 to 20 of 31 total
Set Ascending Direction