Eyepiece Holders

Showing 1 to 20 of 28 total
Set Ascending Direction
  1. PrimaLuceLab - OnAxisLock 31.8mm T2 Visual Back

    $71.00
    SKU: PRI-OAL318

    In stock

    The Primaluce OnAxisLock visual backs allow you to lock your equipment into position with a circular clamp rather than traditional holding screws, ensuring an exceptionally secure connection, a perfectly centered position and will leave your accessories scratch-free. This OnAxisLock eyepiece holder is designed to fit 31.8mm threaded telescope backs and offers a T2 connection.
  2. AstroZap - LX90 Eyepiece Tray

    $75.00
    SKU: AZP-AZ-1104

    Wait Time is 3-5 Days

    The LX90 Eyepiece tray is made of aluminum and can accomadate 1.25" and 2" eyepiece barrel sizes, barlow lens, and many viewing accessories between the 1.25" to 2" margin. 

  3. AstroZap - LX200/RCX 400 Eyepiece Tray

    $75.00
    SKU: AZP-AZ-1105

    Wait Time is 3-5 Days

    The LX200/RCX400 Eyepiece tray is made of aluminum and can accomadate 1.25" and 2" eyepiece barrel sizes, barlow lens, and many viewing accessories between the 1.25" to 2" margin. 

  4. TeleVue - Ethos Eyepiece Carrying Bag

    $150.00
    SKU: TEL-ETB-0020

    In stock

    The Eyepiece Bag for Ethos from Tele Vue is a soft, TV-76-sized case with rigid foam for safely carrying the complete Ethos 5-eyepiece collection as well as smaller type eyepieces.

  5. Shelyak - Alpy guiding EP holder

    Regular Price: $354.70

    You Pay: $299.00

    SKU: SHE-SE0135

    Wait Time is 3-5 Days

    This eyepiece holder replaces the standard Alpy guiding port which is normally used with a centering & guiding camera. Associated with a reticuled eyepiece (not provided) - if possible with an
  6. Baader - 4 Position Q-Turret for Classic 1.25" Eyepieces

    $72.00
    SKU: BAA-BQT

    Wait Time is 3-5 Days

    The perfect complement to the Classic Eyepieces.  Baader's new 4 position Q-Turret enables rapid magnification change with a twist of the turret.

  7. Takahashi - 4-Turret Eyepiece Holder

    $650.00
    SKU: TAK-TKA00404

    Wait Time is 3-5 Days

    Takahashi has just introduced a high quality 90° 4-turret eyepiece holder. The 90° design allows the observer to conveniently view through any if the selected eyepiece in the turret.

    FREE SHIPPING(48 States)
  8. Takahashi - 36.5mm 2" Accessory Tube

    $145.00
    SKU: TAK-TKA00105

    Wait Time is 3-5 Days

    Extension tube for the Takahashi Eyepiece Turret.

  9. Shannon Telescopics - LED Lighted Eyepiece/Accessory Tray

    $210.00
    SKU: ST-LED

    Wait Time is 3-5 Days

    FREE SHIPPING(48 States)
  10. PrimaLuceLab - OnAxisLock 50.8mm Eyepiece Holder for 50.8mm Hybrid-Drive Focusers

    $79.00
    SKU: PRI-OAL508HD2

    Wait Time is 3-5 Days

    OnAxisLock 50.8mm eyepiece holder for 50.8mm Hybrid-Drive focusers replaces the typical eyepiece holder present in AIRY ED72, APO80 and ED90 apochromatic refractors focusers and lets you use all the 50.8mm diameter accessories.

  11. PrimaLuceLab - OnAxisLock 50.8mm Eyepiece Holder for 2.7" Hybrid-Drive Focusers

    $79.00
    SKU: PRI-OAL508HD27

    In stock

    OnAxisLock 50.8mm eyepiece holder for 2,7" Hybrid-Drive focusers replaces the typical eyepiece holder in AIRY ED100 and APO120 apochromatic refractors focuser and lets you take advantage and use all the 50.8mm diameter accessories.

  12. PrimaLuceLab - OnAxisLock 50.8mm Visual Back for SC Telescopes

    $69.00
    SKU: PRI-OAL508SC

    In stock

    The PrimaLuceLab OnAxisLock 50.8mm visual back for SC telescopes is directly screwed onto the back thread common in most Schmidt-Cassegrain telescopes (like the SC and EdgeHD by Celestron or Meade) and lets you use all the 50.8mm diameter accessories.

  13. PrimaLuceLab - OnAxisLock 50.8mm M72x1 Takahashi Visual Back

    $69.00
    SKU: PRI-OAL508TAK72X1

    In stock

    This PrimaLuceLab OnAxisLock eyepiece holder is designed to replace the traditional eyepiece holder on Takahashi telescopes using an M72x1 thread and will allow you to insert any 50.8mm diameter accessory. Specially designed to perfectly center your accessories and offer a rigid and secure connection for heavier equipment, the double locking rings were designed to not mar your accessories and be easy to tighten even while wearing gloves.
  14. AstroZap - ETX Eyepiece Tray

    $55.00
    SKU: AZP-AZ-1103

    Wait Time is 3-5 Days

    The ETX Eyepiece tray is made of aluminum and can accomadate 1.25" and 2" eyepiece barrel sizes, barlow lens, and many viewing accessories between the 1.25" to 2" margin. 

  15. AstroZap - LXD 55/75 Eyepiece Tray

    $50.00
    SKU: AZP-AZ-1102

    Wait Time is 3-5 Days

    The LXD Eyepiece tray is made of aluminum and can accomadate 1.25" and 2" eyepiece barrel sizes, barlow lens, and many viewing accessories between the 1.25" to 2" margin. 

  16. AstroZap - Dobsonian Eyepiece Tray

    $19.00
    SKU: AZP-AZ-1101

    Wait Time is 3-5 Days

    The Dobsonian Eyepiece tray is made of aluminum and can accommodate 1.25" and 2" eyepiece barrel sizes, barlow lens, and many viewing accessories between the 1.25" to 2" margin.

  17. TeleVue - Eyepiece Caddy Set

    $69.49
    SKU: TEL-TEC-1018

    Wait Time is 3-5 Days

    Caddies hold (2) 2" & (3) 1 1/4" eyepieces. Attaches to Yoke arms. Older Yoke arms can be retro-fitted
  18. TeleVue - Eyepiece Carry Bag

    Regular Price: $150.00

    You Pay: $146.95

    SKU: TEL-ECB-0010

    In stock

    The TeleVue Eyepiece Carry Bag is a perfect accessory for carrying all your TeleVue accessories. You can carry non-TeleVue eyepieces also
  19. Baader - 2" Clicklock Eyepiece Clamp for Vixen

    $109.00
    SKU: BAA-CLVX-2

    Wait Time is 3-5 Days

    For all Vixen refractors using the M60 thread. Physical Length: 31mm

  20. Baader - 2" Clicklock Eyepiece Clamp for Takahashi

    $119.00
    SKU: BAA-CLTAK-2

    Wait Time is 3-5 Days

    The wait is over.  Baader Planetarium has developed the big brother to their acclaimed 1¼” Clicklock clamp.

Showing 1 to 20 of 28 total
Set Ascending Direction