Cables

Showing 1 to 20 of 125 total
Set Ascending Direction
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  1. Celestron - USB to RS232 Cable

    $19.95
    SKU: CEL-18775

    In stock

    This cable is used to convert a serial cable into a cable that is compatible with standard USB ports.Recommended for use with our RS-232 cable (93920) and our Programming Cable (93922) which both feature serial connectors
  2. Celestron - NexStar RS232 Cable

    $15.95
    SKU: CEL-93920

    In stock

    Allows your computerized telescopes to be controlled using a laptop computer or PC. Once connected to your hand control port, the telescope can be controlled using popular astronomy software programs. This cable connects to your PC's serial port

  3. Celestron - Programming Cable - Serial

    $22.50
    SKU: CEL-93922

    In stock

    In order to utilize the online firmware updates for your Celestron computerized telescope, you need this programming cable. Cable connects to the PC port on the telescope's drive base.

    This a genuine Celestron part.  Please note that this item cannot be returned due to uncertain factors in DIY product repair and as such Woodland Hills and Celestron are not responsible for any damage caused by repairs or attempted repairs performed at home. Be sure of the steps, before you start.  Contact Celestron technical support at 310-803-5955.

  4. JMI - Serial Cable for BBOX - PC version

    $59.00
    SKU: JMI-CBLBBOX

    Ships in 3-5 Days

    A 12-ft. cable for connecting a BBOX or NGC-MAX to the 9-pin serial port of an IBM PC compatible or to an 8-pin DIN port on an Apple Macintosh
  5. JMI - Encoder Cable for NGC & SGT Computers

    $39.00
    SKU: JMI-CBLMODMOD

    Ships in 3-5 Days

    Cable length depends on telescope. (Specify telescope make, model and year
  6. JMI - Coiled Cord for JMI Hand Units

    $19.00
    SKU: JMI-CBL2COIL

    Ships in 3-5 Days

    Coiled cord for Single-Control or Dual-Control Hand Unit. It includes a 1/8" phono plug on (one or) both ends. (Specify Use
  7. LVI Cameras - Reflex Cable for Canon EOS (2) DSLR Cameras

    Regular Price: $20.00

    You Pay: $9.95

    SKU: LVI-REF-CANON-2

    In stock

    The REFLEX section managed by the MGA device controls a variety of Canon, Nikon, Pentax and Sony cameras by handling the same parameters that are usually managed by commercial software
  8. Meade - #506 Connector Cable Set with Software

    $39.99
    SKU: MEA-04513

    In stock

    The #506 AstroFinder Software and Cable Connector Kit providesaccess to two #494 AutoStar operations: Telescope Control: Use a personal computer (PC) to directlycontrol a Meade #494 AutoStar-compatible telescope through theuse of an astronomical
  9. Meade - #507 Connector Cable Set for LX200 and LX400 models

    $39.99
    SKU: MEA-07047

    In stock

    The Meade #507 Cable Connector Kit allows connecting your LX200-ACF Autostar II keypad to the serial port on your personal computer/laptop. Also compatible with LX200GPS. Length is six feet. Software not included
  10. Meade - #505 Connector Cable Set

    $19.99
    SKU: MEA-07505

    In stock

    Meade 07505 #505 Connector Cable Set consists of a 6' cable, plus a DB-9 serial adapter, to connect your telescope to your laptop or PC to control the scope and download updated Autostar programs

  11. Meade - USB to RS232 Bridge Cable

    Regular Price: $49.99

    You Pay: $44.99

    SKU: MEA-07507

    In stock

    Permits connection of any Meade telescope's RS-232 serial interface to a PC's USB port. The sequence of connection is: telescope/RS-232 port + #505 (for LX90) or #507 (for LX200GPS) Connector Cable + USB Bridge Cable + PC
  12. Meade - 2.0 USB Cable 15 foot

    $14.99
    SKU: MEA-07583

    In stock

    For use with Meade Deep Sky Imager (DSI) Series cameras and the Meade Lunar Planetary Imager (LPI)

  13. Meade - mySKY Cable Set

    $29.95
    SKU: MEA-04549

    In stock

    24 foot coiled cable. Will allow you to hook the mySKY to any Autostar configuration or LX200 Classic
  14. Optec - 6-ft. Serial cable for SSP photometers, DB-9 F/F.

    $20.00
    SKU: OPT-17154

    Ships in 3-5 Days

    The SSP photometer line uses a standard DB9 connector with
  15. Optec - 10-ft. Serial cable for SSP photometers, DB-9 F/F.

    $30.00
    SKU: OPT-17155

    Ships in 3-5 Days

    The SSP photometer line uses a standard DB9 connector with
  16. Optec - 15-ft. Serial cable for SSP photometers, DB-9 F/F.

    $40.00
    SKU: OPT-17156

    Ships in 3-5 Days

    The SSP photometer line uses a standard DB9 connector with
  17. Optec - 25-ft. Serial cable for SSP photometers, DB-9 F/F.

    $50.00
    SKU: OPT-17157

    Ships in 3-5 Days

    The SSP photometer line uses a standard DB9 connector with
  18. Optec - 6-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    $30.00
    SKU: OPT-17470

    Ships in 3-5 Days

    The control cable is comprised of an eight wire CAT 5 cable with
  19. Optec - 12-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    $40.00
    SKU: OPT-17471

    Ships in 3-5 Days

    The control cable is comprised of an eight wire CAT 5 cable with
  20. Optec - 25-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    $50.00
    SKU: OPT-17472

    Ships in 3-5 Days

    The control cable is comprised of an eight wire CAT 5 cable with
Showing 1 to 20 of 125 total
Set Ascending Direction
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7