Accessories

Showing 121 to 140 of 5711 total
Set Ascending Direction
  1. iNova - CS-L Cooling System 2.1 for PLxCam Series

    $198.00
    SKU: INO-CSL2.1

    Wait Time is 3-5 Days

    The CS-L 2.1 Cooling system is an upgrade for iNova PLxCam Series Cameras for long exposure. It features a Peltier module
  2. iNova - C Mount objective lens - 25mm / F1.4

    $47.30
    SKU: INO-CMOL25F14

    Wait Time is 3-5 Days

    C Mount objective lens - 25mm / F1.4
  3. iNova - CS Mount Zoom objective lens - 6/15mm F1.4

    $66.20
    SKU: INO-CSMZOL6/15F14

    Wait Time is 3-5 Days

    This 6-15mm lens incorporates advanced optical elements to ensure all-around sharpness and efficient light conductivity. Its aperture and focus can be manually adjusted.
  4. iNova - CS Mount Zoom objective lens - 3.5/8mm F1.4

    $66.20
    SKU: INO-CSMZOL35/814

    Wait Time is 3-5 Days

    This .5/8mm F1.4 lens incorporates advanced optical elements to ensure all-around sharpness and efficient light conductivity. Its aperture and focus can be manually adjusted.
  5. Starlight Xpress - 180° f/1.55 Oculus Lens

    $145.00
    SKU: OCULUS-180-LENS

    Wait Time is Approximately 1 Week

    The Starlight Xpress Oculus All-Sky Camera comes standard with a 150° fish eye lens. If you would like a wider field, this 180° lens will do the trick.

  6. Opticstar - 1.25 " LRGbB Filter Set (5 filters)

    $57.00
    SKU: OPS-OSRLRGB

    Wait Time is 3-5 Days

    These filters are positioned within a thin metal ring with a full 26mm clear aperture that threads into the barrel of any standard 1.25" eyepiece or filter wheel that can accept 1.25" filters.

  7. FLI - MicroLine Series - E2V CCD47-10-0-353 Midband Grade 0 Monochrome CCD Camera with 25mm Shutter

    $16,545.00
    SKU: ML4710-0-MB

    This Item Will Be Available in 1-2 Weeks

    Goodbye Goliath! MicroLine is smaller and lighter-weight than the competition, but outperforms them in key areas such as noise, frame quality, download speeds, bit-depth, and CCD cooling.

    FREE SHIPPING(48 States)
  8. Imaging Source - Cable connecting two 6-pin IEEE 1394 devices, length 1.80m

    $24.95
    SKU: IMG-CA-1394-66-1-8

    Wait Time is 3-5 Days

    Connects an Astro CCD Camera to a 4 Pin FireWire Connector * Connects IEEE 1394a devices * Connector 1 : 6-pin IEEE 1394a * Connector 2 : 6-pin IEEE 1394a * Length : 1
  9. Imaging Source - Cable connecting a 4-pin and a 6-pin IEEE 1394 device

    $29.80
    SKU: IMG-CA-1394-64-PJ-2

    Wait Time is 3-5 Days

    Cable connecting a 4-pin and a 6-pin IEEE 1394 device, it additionally offers a connection to the power supply of the FireWire bus, length 2mConnects an Astro CCD Camera to a 6 Pin FireWire Connector * Connects IEEE 1394a devices * Connecto
  10. Imaging Source - Power Supply Unit - PSU for the Dxx 21F04 camera series (ONLY REQUIRED if the 1394 bus does not supply power), input range 90 to 264 VAC, output 12VDC/1A, US plug

    $38.35
    SKU: IMG-Dxx-21F04-Mainy-US

    Wait Time is 3-5 Days

    PSU for the Dxx 21F04 camera series (ONLY REQUIRED if the 1394 bus does not supply power), input range 90 to 264 VAC, output 12VDC/1A, US plugPower Suppy for Astronomy Cameras / USA Plug * Designed for : Astronomy cameras * Input : 90.
  11. Meade - Deep Sky Imager RGB Color Filter Set

    $39.99
    SKU: MEA-04530

    In stock

    Color Filter Set features:* Red, Green, and Blue interference filters plus an IR blocking filter.* Designed specifically for Meade Deep Sky Imager PRO CCD Cameras.* Multiple high transmission coatings and strong 3mm thick glass.

  12. Optec - Johnson U (Ultra-Violet) filter for SSP-3 or SSP-5 with R6358 PMT

    $125.00
    SKU: OPT-17031

    Wait Time is 3-5 Days

    Optec - Johnson U (Ultra-Violet) filter
  13. QSI - 31mm Filter Retaining Screws - For 3mm thick filters

    $50.00
    SKU: QSI-AC5-CFW31-S3

    Wait Time is 3-5 Days

    Set of retaining screws to hold 3mm thick filters in the QSI 500 Series 31mm filter wheel
  14. QSI - 31mm Filter Retaining Screws - For 5mm thick filters

    $50.00
    SKU: QSI-AC5-CFW31-S5

    Wait Time is 3-5 Days

    Set of retaining screws to hold 5mm thick filters in the QSI 500 Series 31mm filter wheel
  15. QSI - Recirculating Pump

    $129.00
    SKU: QSI-AC5-LHXRP

    Wait Time is 3-5 Days

    Recirculating Pump Water recirculating pump for use with the Liquid Heat Exchanger - 115VAC. Includes twenty feet of clear vinyl tubing
  16. QSI - 500 Series Mid-size Cover

    $195.00
    SKU: QSI-AC5-SCOVER

    Wait Time is 3-5 Days

    QSI 500 Series camera mid-size cover (for "s" models with mechanical shutter), includes T-mount adapter, threaded cap and mounting screws

  17. QSI - QSI 500 Series Tripod/Tether adapter

    $69.00
    SKU: QSI-AC5-TRIPOD

    Wait Time is 3-5 Days

    Tripod/Tether adapter mounts to the side of a 500 Series camera body and adds a 1/4"-20 threaded hole for mounting the camera on a tripod or attaching a tether
  18. QSI - 500 Series WS Cover

    $195.00
    SKU: QSI-AC5-WSCOVER

    Wait Time is 3-5 Days

    QSI 500 Series camera WS cover, includes T-mount adapter, threaded cap and mounting screws. Canon and Nikon SLR lenses can be used with the WS cover for taking widefield exposures
  19. QSI - Astronomik 1.25" Hydrogen-Alpha filter 12nm FWHM

    $129.00
    SKU: QSI-FL1-AS-HA12

    Wait Time is 3-5 Days

    Astronomik Hydrogen-Alpha filter with a bandpass of 12nm. For use with internal color filter wheel in QSI 500 Series cameras. This Ha filter is parfocal with the Astronomik LRGB Type IIc color filters
  20. QSI - Astronomik 1.25" Hydrogen-Alpha filter 6nm FWHM

    $199.00
    SKU: QSI-FL1-AS-HA6

    Wait Time is 3-5 Days

    Astronomik Hydrogen-Alpha filter with a bandpass of 6nm. For use with internal color filter wheel in QSI 500 Series cameras. This Ha filter is parfocal with the Astronomik LRGB Type IIc color filters shipped with QSI 500 Series cameras
Showing 121 to 140 of 5711 total
Set Ascending Direction