Order By Phone
STORE FRONT: 5348 Topanga Canyon Blvd, Woodland Hills CA 91364


Point Grey - Flea3 2.0MP Color GigE (Sony ICX274) Camera with A/C Adaptor


Be the first to review this product

Availability: Available - Ships in 2-4 Days


Available - Ships in 2-4 Days

Manufactured by: Point Grey Research

Point Grey Research Flea3 2.0MP Color GigE (Sony ICX274) Camera


Point Grey Research Flea3 2.0MP Color GigE (Sony ICX274) Camera


  • Sony ICX274 1/1.8" Global Shutter CCD
  • 1624 x 1224 at 15FPS
  • Color, C-Mount
  • Gigabit Ethernet (1000 Mbit/s interface)
  • 29 x 29 x 30 mm
  • 8-pin Hirose HR25 GPIO opto-isolated pins
  • Power supply NOT included: (12v 1.5A PS)



GigE Benefits

The 1000Mb/s Gigabit Ethernet bus provides enough bandwidth to transmit over distances up to 100m. System costs are reduced with low-cost frame grabbers and by eliminating the need for cable repeaters. Scalablity also reduces future costs as GigE Vision continues development for faster bandwidths.


Opto-Isolated GPIO

Opto-isolated GPIO protects the camera from noise on the ground pin generated by external devices as well as power issues caused by malfunctioning devies attached to the camera.


Secure Connector

Screw holes on each side of the camera’s GigE connector enable secure connection to the camera, guaranteeing a reliable connection, and reducing stress on internal electronics caused by cable movement.


Industry Standard Design

Every mechanical component of the Flea3 camera is designed to maximize usability, including the compact aluminum case, C-mount lens holder and ASA/ISO-compliant tripod mounting bracket, status LED and removable glass/IR filter system.



Hardware and software triggering for synchronizing multiple cameras or coordinating with external devices. Supported modes include standard, bulb shutter, skip frames, multiple exposure (preset and pulse width), over-lapped exposure/readout and multi-shot.


Frame Buffer/Image Retransmit

The camera is equipped with a 32MB frame buffer that can be used to store multiple images for transmission, or retransmission, at a later time. This is useful in situations where the available GigE bandwidth must be maximized between multiple cameras, or where an image must be sent again.


Updatable FPGA

The field-programmable gate array chip controls all camera functionality, including on-camera color processing, pixel binning, user memory channels and more. It can also be updated with new firmware in the field.



The FlyCapture SDK is compatible with Microsoft Windows and Linux Ubuntu and a full software API library, demo programs and C/C++/C# example source code. It also includes the Point Grey filter driver, which provides enhanced data communication between the GigE bus and the CPU and the GigE Configurator tool for configuring IP addressing.



Tripod adapter with every camera. All the accessories you need to get up and running, such as interface cards, cables, and power adapters are available from Point Grey.







Product Series

The Flea3 line of USB 3.0 cameras offers a variety CMOS image sensors in ultra-compact, low-cost packages. To maximize USB 3.0 reliability, the Flea3 provides a unique set of features including a 32 megabyte frame buffer; on-camera power, temperature, and status monitoring; and in-field updatable firmware. The camera also provides on-camera processing including color interpolation, look up table, gamma correction, and pixel binning functionality.

Additional Information

Name Point Grey - Flea3 2.0MP Color GigE (Sony ICX274) Camera with A/C Adaptor
Manufacturer Point Grey Research
Model FL3-GE-20S4C-C
Manufacturer Part No FL3-GE-20S4C-C
Electronic Shutter 0.03ms to 32s (Extended Shutter Mode)
Frames Per Second (fps) 15
Operating Temperature 0 to +45 °C
Pixel Size 4.4μm x 4.4μm
Pixel Depth 8, 12, 16 and 24-bit Digital Data
Sensor Type Sony ICX274
Shutter Global Shutter
Storage Temperature -30 to +60 °C
Synchronization External or Via Software
Transfer Speed 10/100/1000 Mbit/s