Optec - Pyxis LE Camera Field Rotator

Be the first to review this product

Review and collect 50 points.
FREE SHIPPING(48 States)
$695.00

Availability: In stock

With this product, you earn 695 loyalty point(s). Find more about this!

Bread Checkout
 

The Optec Pyxis LE is a low profile, low weight, with amazing 11Lb weight capacity and flexible Camera Field Rotator ( to image long exposure on fork mount as well as precise orientation of the subject to camera sensor) with standard mechanical interfaces for simplicity of connectivity. as well as WiFi ability. Based upon the outline by Ted Agos of the Acorn Hollow Observatory, the Pyxis LE is the the thinnest camera field rotator available!

SKU: OPT-19630
Manufactured by:
Optec
 

Product Description

The Optec Pyxis LE is a low profile, low weight, and flexible Camera Field Rotator with standard mechanical interfaces for simplicity of connectivity. Based upon the outline by Ted Agos of the Acorn Hollow Observatory, the Pyxis LE is the the thinnest camera field rotator available!

The telescope side of the Pyxis LE is a basic two-inch "push-fit" barrel. The long barrel adapter, barely shy of 2-1/2 inches, is effectively embedded into any 2" focuser, for example, the Optec TCF-S Temperature Compensating Focuser. Combined with the TCF-S or TCF-Si, the Pyxis LE creates a focuser/rotator combination requiring less than 4-1/2 inches of back-focus.

The camera side of the Pyxis LE is a standard male T-string. Any T-threaded camera, filter wheel, off-axis guider, or industry standard T2 ring can screw directly on to the exit port of the Pyxis LE - no other adapters are required.All of the users existing accessories - T-thread spacers, off-axis guiders, filter wheels, and so forth - can be attached directly. With the Pyxis LE, the confusion typically surrounding adapters is eliminated since the Pyxis LE is ready to use out-of-the-box. Simply attach your camera, slip into a 2-inch focuser, and you're ready to go.

The Pyxis LE is ideally suited for small, well-balanced cameras, for example, the QSI, Fish Camp, Starlight Xpress or SBIG ST-series CCD cameras. Canon and Nikon DLSR cameras will attach directly using an optional T2 bayonet ring. Optional T-thread extender rings can be added in 7.5 and 15mm lengths for additional offset to avoid filter wheel stepper motors such as with the SBIG CFW9.

 

f/6.3 Telecompressor Optics Integration... 

The Pyxis LE can also accommodate Schmidt-Cassegrain f/6.3 optics (or any 43mm measurement optical system) without adding extra back-focus. The f/6.3 telecompressors available from Celestron, Meade, Antares and Hirsch fit directly into the 2-inch nosepiece of the Pyxis LE. The optics should first be removed from their original housing and then using a pair of optional retainers the optical elements can be inserted anywhere within the 2" barrel of the rotator. Optec professionals will introduce customer supplied lenses for a nominal fee. This feature is essential when setting critical telecompressor or field flattener spacing to the imaging sensor. It should also be noted that the optics rotate with the camera so additional flat-fields are usually not required for different position angles.

The mechanical design is exceptionally robust and rigid. The Pyxis LE's rigidity is due of two coaxial thrust bearings that provide support for small to medium sized instrument loads (2.5kg or 5.5 lbs. maximum). The large separation distance between bearing surfaces (2.28") further increases the stability of the Pyxis LE. This permits off-axis guiders, filter wheels, AO units and of course, the CCD camera, to be attached with no flexure. This unique bearing arrangement allows the rotator to be very thin and use only 0.68" of back focus. 

 

Interface Software and ASCOM Driver...

Interfacing with the computer is also extremely simple. Just plug in the USB and 12VDC cables, let Windows install the drivers automatically, open up Pyxis-LE Control, watch it automatically connect, and start using your rotator. Additionally, the Pyxis LE is ASCOM compliant so it can be used in programs like Maxim DL. Intelligent anti-cable wrapping is programmed at the firmware level so you can expect a non-binding experience with both the control program and the ASCOM driver.

Easy to use Windows application allows simple control over your Pyxis LE camera field rotator. Graphical position indicator allows for quick adjustments and instantaneous position feedback.

The View menu enables users to hide/show certain regions of the application to reduce overall window clutter.

 

Features:

  • Physical Size: 3.14" x 4" x 6.5" (80mm x 102mm x 165mm)

  • Clear aperture: 1.515" (38.5mm)

  • Weight: approx. 1.1 lb. (.5 kg)

  • Telescope Adapter: 2" barrel adapter for any 2" focuser

  • Camera Adapter: T-thread

  • Back focus: .68" (17.3mm)

  • Resolution: 0.050 degrees/step

  • Power: 12 VDC 1 Amp (12 Watts max)

  • Communications Interface: USB 2.0

  • Software Interface: Pyxis LE-Control and ASCOM-compliant driver

 

 

 

 

mw

Specifications

Name Optec - Pyxis LE Camera Field Rotator
Manufacturer Optec
Model OPT-19630
Aperture 1.515"
Backfocus Distance .68" (17.3mm)
Camera Adapter T-thread
Computer Interface USB 2.0
Dimensions LxHxW 3.14" x 4" x 6.5"
Power 12 VDC 1 Amp (12 Watts max)
Resolution 0.050 degrees/step
Software interface Pyxis LE-Control and ASCOM-compliant driver
Telescope Adapter 2" barrel adapter for any 2" focuser

Reviews

How do you rate this product? *
Quality
Value

FAQ / Downloads