19 Item(s)
Set Descending Direction
  1. Takahashi - 2" Extension Tube

    SKU: TAK-TKP31112

    In stock

    This 2" extension tube by Takahashi is compatible with the TOA-130.

  2. Takahashi - CA Ring 100 for Reducers

    SKU: TAK-TKP19205

    Wait Time is 3-5 Days

    Takahashi CA Ring 100 for Takahashi reducers.

  3. Takahashi - 1.25" Compression Ring Adapter

    SKU: TAK-TKP00101

    Wait Time is 3-5 Days

    Takahashi 1.25" Compression Ring Adapter
  4. Takahashi - f/6 Visual Extension Tube

    SKU: TAK-TKP00105

    Wait Time is 3-5 Days

    Takahashi - f/6 Visual Extension Tube
  5. Takahashi - 4-Turret Eyepiece Holder

    SKU: TAK-TKA00404

    Wait Time is 3-5 Days

    Takahashi has just introduced a high quality 90° 4-turret eyepiece holder. The 90° design allows the observer to conveniently view through any if the selected eyepiece in the turret.

    FREE SHIPPING(48 States)
  6. Takahashi - 36.5mm 2" Accessory Tube

    SKU: TAK-TKA00105

    Wait Time is 3-5 Days

    Extension tube for the Takahashi Eyepiece Turret.

  7. Takahashi - 2" Adapter for FSQ85-ED

    SKU: TAK-TKT37110

    Wait Time is 3-5 Days

    The Takahashi 2" Eyepiece Adapter TOA0401 was designed specifically for the Takahashi FSQ-85ED, but is also needed for the FSQ-106ED-XIII when using a 1.6X Extender. Slides inside exisiting focuser tube to accept all 2" eyepieces and accessories.

  8. Takahashi - Vari-Ring Spacer

    SKU: TAK-TKA31581

    In stock

    The Takahashi vari-ring for the TOA-130 reducer can vary the reduction of the reducer in the TOA telescope series.

  9. Takahashi - Medium (M) Accessory Mounting Plate for EM-200

    SKU: TAK-TMP02200

    In stock

    Takahashi medium (M) accessory plate for the EM-200 mount. Mounts FS-152 tube holder to EM-200 mount.

  10. Takahashi - Feldstein Adapter #6 for SBIG STL Cameras

    SKU: TAK-TCD0017

    Wait Time is 3-5 Days

    The Feldstein adapter is used for focuser ends found on some Takahashi telescopes to mate items such as a camera to the telescope - or the other end has SCT thread which allows use of SCT-threaded items such as visual backs, T-adapters, etc.

  11. Takahashi - Extender-Q 2 " Adapter

    Regular Price: $82.00

    You Pay: $69.70

    SKU: TAK-TKA00596

    Wait Time is 3-5 Days

    This perfectly machined 2" adapter threads onto the visual adapter section of the Takahashi Extender-Q TEQ0002. The Takahashi Extender-Q allows the use of 2" eyepieces or most 2" refractor star diagonals.

    Out of stock

  12. Takahashi - 2" Compression Ring Adapter for Sky-90/FS-78

    Regular Price: $142.90

    You Pay: $138.00

    SKU: TAK-TOA0060

    In stock

    The Takahashi 2" Compression Ring Adapter for Sky-90 and FS78 OTA. With brass interiors, you can safely insert and use your 2" barrel sized eyepieces in this OTA. Simply attach the compression ring directly to the focuser.

  13. Takahashi - 2 " Compression Ring Adapter for FS-102/128/130/152

    SKU: TAK-TKP27110

    Wait Time is 3-5 Days

    This compression ring adapter is a great accessory for FS-102, 128, 130, and 152 optical tube assemblies by Takahashi.

  14. Takahashi - 2" Sleeve to 1.25" Adapter

    SKU: TAK-TKP00113

    Wait Time is 3-5 Days

    Takahashi 2" Sleeve to 1.25" Adapter
  15. Takahashi - Visual Coupling S Adapter

    SKU: TAK-TKP00103

    Wait Time is 3-5 Days

    This visual coupling must be used with Tak products, such as the FSQ-85ED, that incorporate a collimating scope sleeve with 48mm in the focal train.

  16. Takahashi - FS-102/128 2" Ocular Adapter

    SKU: TAK-TKP27111

    Wait Time is 3-5 Days

    Takahashi FS-102/128 2" Ocular Adapter
  17. Takahashi - 2" Eyepiece and Accessory Adapter for Takahashi FS78

    SKU: TAK-TOA0040

    Wait Time is 3-5 Days

    Takahashi - 2" Eyepiece and Accessory Adapter for Takahashi FS78

    Out of stock

  18. Takahashi - 2" Eyepiece Compression Ring Holder - Sky 90 / FS-78

    SKU: TAK-31201

    Wait Time is 3-5 Days

    Takahashi 2" Eyepiece Compression Ring Holder - Sky 90 / FS-78
  19. Takahashi - f/8 Visual Extension Tube

    SKU: TAK-TKP00106

    Wait Time is 3-5 Days

19 Item(s)
Set Descending Direction

Takahashi began manufacturing telescopes in 1967 their 35th year of business. They began and remain in the sand casting business today.

Their first model was TS-65 a 65mm x 900mm achromat. By 1969 they produced their first 65mm triplet semi-apochromat and 100mm f/10 reflector in 1969.

The TS80 built in April of 1972 was the first triplet apochromat Takahashi telescope built. Then in 1973 their first fluorite triplet telescope was used too photograph the total solar eclipse on June 29th of that year in Africa. It was an 80mm x 1200mm and in the same year they produced their first equatorial mount with a polar telescope.

In 1977 Takahashi introduced their second triplet fluorite apochromat the TS-90 a 90mm x 1000mm and the 90S mount and the famous JP mount in 1979. The NJP mount as it is called today is still in production. The JP and NJP mounts can be converted to Takahashi’s Temma “go to” system. This is a testament to its timeless design. Then followed by the introduction of famous Sky Patrol portable mount in 1981, this mount was a favorite for eclipse chasers. It features a polar alignment telescope in the R.A. shaft and integral 40mm guide scope. In that year the fluorite Series FC 65, 78, 100, and 125 were introduced. This series remained in production until 1994.

Takahashi developed the camera angle adjuster which is a bearing device that allows the camera or ocular to be rotated 360° without loss of focus. This rotator device is still used today for all Takahashi focuser from the 2” to 4” focusers and all astrographs.

From this time Takahashi used a compression ring ocular holder to provide precise centering of the ocular and optics of the telescope.

In 1983 introduced their Epsilon Series of Hyperbolic flat field astrographs with the 130, 160, 200, 250 and 300. Takahashi was able to perfect the process for grinding hyperbolic mirrors and is doing so today for its current Epsilons and corrected RC astrographs. This was also the year they introduced the prototype FCT-150 fluorite triplet apochromat and the revolutionary EM-2000 mount which used electric clutches and had a direct read out of R.A. and Dec. This mount could be transported to remote sites because it broke down into three parts.

In 1985 the triplet FCT Series included a 65, 76, 100, 125 and 150mm fluorite triplets. The Mewlon Series Dall-Kirkham Cassegrain telescopes were the next series in sizes of 180, 210, 250 and 300mm were developed along with the CN-212, a convertible 212mm classical Cassegrain f/12 and corrected Newtonian convertible telescope.

In 1989 Takahashi introduced their famous TSC-225: a 225mm Schmidt-Cassegrain with innovations such as 10 baffles in the baffle tube and a rear cell fan for cooling of the optics. The 225 used white German optical glass for its corrector plate. Ever the innovator Takahashi produced the carbon fiber Epsilon-250 in 1992 closely followed by the carbon fiber Epsilon-210 hyperbolic astrographs.

Takahashi also makes observatory telescopes which include: 350mm hyperbolic astrographs, 300 and 400mm Cassegrains, 200, 250 and 300mm triplet apochromatic refractors and the large EM-3500 mounts to carry them.

Takahashi’s manufacture of refractors, Newtonian reflectors, Cassegrain/Newtonians, classical Cassegrains, hyperbolic astrographs, corrected Baker RC astrographs, mounts and oculars makes it one of the most versatile companies of its type in the world.

The current line of Ortho Apochromatic refractors use a design that is absolutely color free, will include a 110mm, 130mm [currently produced], 150mm [introduced 06/05] and a 180mm. Coming also is a line of Ortho Astrographs.

Their manufacturing facilities are located in Urii, Japan with their headquarters located in the Itabahsi prefecture of Tokyo. The facilities include the main assembly and design facility where the instruments and optics designed, are tested and assembled. The second is the sand casting factory. The third is the facility where the observatory mounts the EM-3500 and EM-2500 are assembled along with the machining shop next door to their warehouse facility. The fourth is the mirror grinding, polishing and testing building.

Takahashi’s staff includes: optical, design and mechanical engineers many of whom are amateur astronomers, who have discovered new asteroids one of which was named Urii in honor of the city where the Takahashi manufacturing facilities are located.