Lumicon International

Showing 1 to 20 of 36 total
Set Descending Direction
  1. Lumicon - Oxygen III Filter - 2"

    $199.95
    SKU: LMC-LF3045

    In stock

    The legendary Lumicon 2" OIII narrow band-pass filter isolates just the two doubly ionized oxygen lines

  2. Lumicon - Clear Dust Seal Meade 10" - 14" SCT

    $107.95
    SKU: LMC-LF3160

    Wait Time is 3-5 Days

    Lumicon Dust Seals keep dust, moisture and insects out of your telescope. The glass is a plane-parallel polished surface

  3. Lumicon - Comet Filter - Visual Back

    $199.95
    SKU: LMC-LF3080

    Wait Time is 3-5 Days

    The Lumicon Cassegrain Comet Filter, a narrow band-pass filter (25nm), isolates the 501nm OIII line and both C2 lines at 511nm and 514nm
  4. Lumicon - 2" Multiple Filter Selector (Filters NOT Included)

    Regular Price: $251.95

    You Pay: $125.00

    SKU: LMC-LF5015

    Wait Time is 3-5 Days

    Lumicon's 2" Multiple Filter Selector allows you to switch back and forth between 2" filters

  5. Lumicon - 1.83 " Enhanced Secondary Mirror

    $127.95
    SKU: LMC-LD2025

    Wait Time is 3-5 Days

    The Lumicon 1.83 inch Enhanced Secondary Mirror, LD2025, is the same high-quality 1/8th wave mirror that Lumicon uses in its 2" Enhanced Aluminum Diagonal, the LD1015, and is suitable for use as a secondary mirror in Newtonian telescopes
  6. Lumicon - 1.25" Lunar & Planetary Filter Set

    $157.95
    SKU: LMC-LF5045

    Wait Time is 3-5 Days

    The Lumicon 1.25" Lunar & Planetary Filter Set, LF5045, is an excellent "starter-kit,"

  7. Lumicon - 2in Enhanced Diagonal

    $189.95
    SKU: LMC-LD1015

    Wait Time is 3-5 Days

    The Lumicon 2" Enhanced Aluminum Diagonal reflects 96 to 97 percent of the light from the telescope's primary optics directly into your eyepiece.
  8. Lumicon - 2.5X CCD Compressor Lens for 1.25 Imagers

    $192.95
    SKU: LMC-LL1025

    Wait Time is 3-5 Days

    The 2.5X CCD Compressor Lens is used to widen the field-of-view of 1.25" Digital Imagers on refractors and SCTs. The LL1025 threads into the "nose-piece" of 1.25" Digital Imagers
  9. Lumicon - H- Beta Filter - Visual Back

    $199.95
    SKU: LMC-LF3065

    In stock

    Also known as the Horsehead Nebula filter, the Lumicon Cassegrain Hydrogen-Beta Filter isolates only the hydrogen-beta line of the spectrum (486nm) in a narrow pass-band just 9 nm wide, providing maximum contrast
  10. Lumicon - Minus Violet Filter - 72mm

    $116.95
    SKU: LMC-LF3135

    Wait Time is 3-5 Days

    Lumicon Minus Violet and Infrared Blocking Filters are used primarily to "bracket" the color-corrected band of refracting telescopes.

  11. Lumicon - Ultra High Contrast Filter - 2"

    $199.95
    SKU: LMC-LF3030

    Wait Time is 3-5 Days

  12. Lumicon - Laser Pointer Bracket and Laser with 1/4-20 Tri-Pod Mounting for Lumicon Universal Dove Tail System

    $126.95
    SKU: LMC-LS3070

    Wait Time is 3-5 Days

    Lumicon proudly introduces the Laser Pointer Bracket System for standard tripods. Now you can point your laser and lock on to a target with your existing tripod. The base is threaded on the bottom to accept standard 1/4-20 tripod threads

  13. Lumicon - 1.25" Lunar & Planetary Filter Set (Dark)

    $141.95
    SKU: LMC-LF5085

    Wait Time is 3-5 Days

    The Lumicon 1.25" Lunar & Planetary Filter Set (Light) contains the following filters: #12 Yellow, #25 Red, #47 Violet, #58 Green

  14. Lumicon - 2" Lunar & Planetary Filter Set

    $186.95
    SKU: LMC-LF5050

    Wait Time is 3-5 Days

    The Lumicon 2" Lunar & Planetary Filter Set, LF5050, is an excellent, general-purpose set of four (4) of Lumicon's most popular 2" lunar and planetary filters

  15. Lumicon - 1.83 " LumiBrite Secondary Mirror

    $190.95
    SKU: LMC-LD2015

    Wait Time is 3-5 Days

    The Lumicon 1.83 inch LumiBrite Secondary Mirror, LD2015, is the same high-quality 1/8th wave mirror that Lumicon uses in its 2" LumiBrite Diagonal, the LD1025, and is suitable for use as a secondary mirror in Newtonian telescopes
  16. Lumicon - Oxygen III Filter - Visual Back

    $199.95
    SKU: LMC-LF3050

    Wait Time is 3-5 Days

    The legendary Lumicon Cassegrain OIII narrow band-pass filter threads onto your telescope's SCT rear-cell, and presents male SCT threads for accessory attachment.

  17. Lumicon - Clear Dust Seal Celestron 11" / 14" SCT

    $107.95
    SKU: LMC-LF3165

    Wait Time is 3-5 Days

    Lumicon Dust Seals keep dust, moisture and insects out of your telescope.

  18. Lumicon - 2" Deep Sky Filter

    $199.95
    SKU: LMC-LF3015

    In stock

    The best all-purpose nebula filter on the market today.

  19. Lumicon - Laser Pointer System for Refractors

    $126.95
    SKU: LMC-LS2065

    Wait Time is 3-5 Days

    Lumicon proudly introduces the Laser Pointer System for Refractors. The LS2065 is point-and-click technology applied to your refractor telescope
  20. Lumicon - 2in Star Mirror Diagonal

    $129.95
    SKU: LMC-LD1005

    Wait Time is 3-5 Days

    The Lumicon 2" Mirror Diagonal features compression-ring eyepiece holders, and includes a 2" to 1.25" reducer. A Lumicon-quality star diagonal at an entry-level price
Showing 1 to 20 of 36 total
Set Descending Direction

Lumicon International offers the best and most extensive line of astronomical filters and astronomical accessories in the world. Astronomy Filters for every imagined visual and astrophotographic application are available in many configurations and sizes. Telescope Filters for light polluted skies, planets, deep sky objects, galaxies, nebulae, planetary nebulae, comets, and solar prominences. All Nebula and light Pollution filter are individually tested and proudly inscribed with the percentage of light transmittance of their primary emission lines.

Lumicon also offers a complete line of unique optical accessories, including the World Famous Easy Guider Series, Sky Vector Systems, Diagonals, Finderscopes, and Binocular Viewers.

To ensure that Lumicon astronomy accessories and astronomy filters remain the World’s Best, the strictest quality control standards are employed throughout the production process. All Lumicon astronomical products are made to the highest standards available and come with a 100% Satisfaction Guarantee!