Losmandy

Showing 81 to 100 of 133 total
Set Descending Direction
  1. Losmandy - Digital Drive Board for GM8 and G9

    $200.00
    SKU: LOS-DDB8

    Wait Time is 3-5 Days

    Losmandy replacement digital drive board for GM8 and G9 mounts.
  2. Losmandy - Universal Vixen Style Dovetail Plate - 7" Length

    $49.00
    SKU: LOS-VUP7

    In stock

  3. Losmandy - 21 LB Weight

    $100.00
    SKU: LOS-21LB

    Wait Time is 3-5 Days

    Designed specifically for the Losmandy GM-8, G-9, and G-11 Mount. The Losmandy 21CW Counterweight weighs 21 lbs. Helps to balance your mounts when adding extra accessories.
  4. Losmandy - Precision Worm Block for GM-8 WITH High-Precision Worm

    $395.00
    SKU: LOS-OPW-8

    Wait Time is 3-5 Days

    Precision stainless steel bearing block & 7075 aluminum housing. All in-line motor/gearbox worm design. Preloaded bearings & screw adjust worm gear mesh
    FREE SHIPPING(48 States)
  5. Losmandy - Dovetail Plate Screw

    $6.00
    SKU: LOS-DS

    Wait Time is 3-5 Days

    Losmandy dovetail plate screws, set of 4. Used to mount dovetails to curved blocks.
  6. Losmandy - Counterweight Thumb Screw with Aluminum Knob for 21LB Weight

    $8.00
    SKU: LOS-CWTS21

    Wait Time is 3-5 Days

    Losmandy counterweight Thumb Screw with Aluminum Knob for 21LB Weight

  7. Losmandy - DC11 - Dovetail Plate for Celestron 11 "

    $115.00
    SKU: LOS-DC11

    In stock

    Losmandy D series dovetail plate for 11" Celestron telescopes, bolts to existing holes. Wt. 2.25 lbs. Length 17.25" HS 16.0/16.50, Ht. top of tube to top of dovetail plate 1.00" Thickness .6".
  8. Losmandy - 125mm DVR Series Guide Ring Set

    $115.00
    SKU: LOS-DVR125

    In stock

    The Losmandy DVR125 ring set is compatible with D Series and Vixen Series plates. These125mm ID rings with three point adjustments made of 7075 aluminum are machined with 0.25" Delrin tips. There are two rings per set.

  9. Losmandy - Hand Control Splitter

    $7.50
    SKU: LOS-HCS

    Wait Time is 3-5 Days

    LOSMANDY HAND CONTROL SPLITTER, FOR AUTO-GUIDERS
  10. Losmandy - 6" Riser for AZ8 Mount

    $100.00
    SKU: LOS-AZ8-RISER

    Wait Time is 3-5 Days

    Losmandy 6" Riser for AZ8 Mount

  11. Losmandy - DM12 Dovetail Plate for Meade 12 "

    $140.00
    SKU: LOS-DM12

    Wait Time is 3-5 Days

    Losmandy D series dovetail plate for Meade 12" telescopes, bolts to existing holes. Wt. 3.5 lbs. Length 18.925" HS 18.175, Ht. top of tube to top of dovetail plate 1.20"
  12. Losmandy - GM 8 S Equatorial Head, Digital Drive, Weight Shaft, LW Tripod and 7Ib. weight

    $1,695.00
    SKU: LOS-GM8S

    In stock

    Losmandy - GM 8 S Equatorial Head, Digital Drive, Weight Shaft, LW Tripod and 7Ib. weight

  13. Losmandy - Polar Scope Illuminator with Battery

    $55.00
    SKU: LOS-PSI

    Wait Time is 3-5 Days

    Our completely redesigned PSI will illuminate the alignment reticle of the PS polar scope with five different intensities in both constant and flashing modes.

  14. Losmandy - 108mm Three Ring Guide Scope System

    $149.00
    SKU: LOS-DVR-108/66

    Wait Time is 3-5 Days

    The Losmandy DVR108/66 Three Ring Guide Scope Setup. Two Rings to hold the Guide Scope and one Ring to stabilize the camera/guider.

  15. Losmandy - 125mm Guide Ring Set - D Series

    $165.00
    SKU: LOS-DR125

    In stock

    Losmandy guide rings have Delrin tips to keep your telescope surface from being heavily scratched. This set has an interior diameter of 125mm and is mounted to D series dovetail shoes. Wt. 2.5 lbs. per set, 2 rings per set, dovetail mounted, no tools needed. I.D. size from 3.1" to 5.0", Ht. from top of dovetail plate to center of rings 3.2"
  16. Losmandy - Gemini Servo Motor Gearbox only

    $35.00
    SKU: LOS-SVGB

    Wait Time is 3-5 Days

    Gemini Servo Motor Gearbox only
  17. Losmandy - Male D Series Saddle to Female V Series Adapter

    $115.00
    SKU: LOS-DV-ADAPTER

    Wait Time is 3-5 Days

    Losmandy Male D series saddle to female V series plate adapter. Locking knob on V series Saddle. Convert your D series saddle to a V series saddle.
  18. Losmandy - Steeper Motor Coiled Cord

    $15.00
    SKU: LOS-SMCC

    Wait Time is 3-5 Days

    STEPPER MOTOR COILED CORD
  19. Losmandy - Tucked In Motor Upgrade for GM8 Mounts

    $300.00
    SKU: LOS-GM8-FITM

    Wait Time is 3-5 Days

    Streamline your Losmandy GM8 mount design without having to buy an entirely new mount! This is a "tucked in" motor design base for the GM8 mount with a more compact form factor. By removing the front axis of your existing GM8 mount, you can attach it to this new base for a fraction the price of buying an entirely new mount. Never worry about having to remove your motors for travel. Includes high-torque motors. This is a serviced upgrade, your mount must be returned to Losmandy for this upgrade. Shipping charges apply.
    FREE SHIPPING(48 States)
  20. Losmandy - RETRO-FIT KIT FOR: GM-8, G-11, HGM200, G9

    $1,595.00
    SKU: LOS-GRETRO

    Wait Time is 3-5 Days

    DC servo motor based GOTO computerized positioning system. Retro-Fit Kit for: GM-8, G-11, HGM200 & G9 equatorial mounts
    FREE SHIPPING(48 States)
Showing 81 to 100 of 133 total
Set Descending Direction

Losmandy, also known as Hollywood General Machining, has earned quite a reputation throughout the astronomical community for providing high-quality, precisely-machined German Equatorial mounts, dovetail plates, mounting rings, counterweight and piggyback systems, and other nicely done metal telescope accessories.

<iframe width="560" height="315" src="https://www.youtube.com/embed/videoseries?list=PLhIdevNxOhkvv_tgh7rNrjOs1TkxTsXze" frameborder="0" allowfullscreen></iframe>