Apogee Alta U16M D9F High-Cooling Camera with 50mm 7-Position Filter Wheel
The Alta Design Team at Apogee worked hard over a two year period to bring this advanced degree of integration and performance to the astronomy market. Alta has set new standards for imaging performance, connectivity, cooling, compactness, cost effectiveness, and the elimination of external support electronics. Like the AP and KX series, Alta is a platform, not a CCD or specific interface type. It is designed for a variety of CCDs, ranging from the smallest to those measuring 36mm on a side with 4096 x 4096 arrays
So many improvements in such a small package: No more external controllers, plug-in cards, or frame grabbers. Dual digitization for high precision plus high speed focus. On-board camera memory for fast local sequences and no worries about transfer interruptions. Time delayed integration for imaging far beyond the size of the sensor. A single 12V power input for optional battery-powered operation. In addition, the Apogee Alta U Series cameras have dual digitization, 12 and 16 bit. The 12 bit mode is intended primarily as a focus mode.
Alta U Series cameras are available with a wide variety of sensors, including: Back-illuminated sensors with very high quantum efficiency, some with sensitivity in the deep UV; Interline transfer sensors with fast electronic shuttering and inherent anti-blooming; front-illuminated CCDs with high sensitivity in the near-IR without etaloning. In general, the larger the pixel size, the higher the dynamic range. Smaller pixels (about 7 microns) are typically used for microscopy (U32; U2000; U4000); larger pixels and larger arrays are typically used for astronomy (U42, U47 back-illuminated; U16M, U9000, U6 front-illuminated).
Apogee Alta Scientific Imaging Systems means you'll get High Speed, low noise, 16/12 bit dual digitization to 7 MHz, TEC cooling to >75C. Lifetime warranty on CCD chamber seal. Fast USB 2.0 advanced I/O control. The Apogee Alta imaging systems represent cost effective advanced imaging technology not found anywhere else. The Alta platform currently supports 11 different housing configurations, including high cooling, wide entrance angle, and low profile variants, many with a choice of fans or liquid circulation.
Apogee Alta U16M CCD Camera Features...
- 4096 x 4096 array, 9 x 9 micron pixels
- 5 MHz 12-bit and 1 MHz 16-bit digitization
- 32 Mbyte camera memory
- USB 2.0 interface: no plug in cards or external controllers
- Programmable, intelligent cooling to 45C below ambient (D07 housing) / 60-65C below ambient (D09 housing)
- Binning up to 8 Horizontal x 4095 Vertical
- Subarray readout and fast sequencing modes
- Precision time delayed integration readout
- Programmable fan speed for low / zero vibration
- Two serial port outputs for control of peripheral devices
- General purpose programmable I/O port
- External triggering and strobe controls
- ActiveX drivers included with every system (other software sold separately)
- Field upgradeable firmware
- Self-test capability with data simulators
- Fused silica windows
- Runs from single 12V supply with input voltage monitor
- Compact enclosure
- Programmable status indicators
About the Kodak KAF-16803 Sensor...
The Kodak KAF-16803 image sensor is a redesigned version of the popular KAF-16801E image sensor (4096 x 4096 pixel resolution) with enhancements that specifically target the needs of high performance digital radiography applications. Improvements include enhanced quantum efficiency for improved DQE at higher spatial frequencies, lower noise for improved contrast in areas of high density, and anti-blooming protection to prevent image bleed from over exposure in regions outside the patient.
Utilizing Kodak's proprietary single gate ITO process and micro-lens technology, the KAF-16803 image sensor with its large imaging area and small pixel size provides the sensitivity, resolution and contrast necessary for high quality digital radiographs. To simplify device integration, the KAF-16803 image sensor uses the same pin-out and package as the KAF-16801E image sensor.
About the Apogee AFW50-7S Filter Wheel...
The Apogee AFW50-7S filter wheel comes with a large 7 position carousel that holds 50mm square filters (sold separately), which are ideal for the U9000 and U16 imaging systems.
The filter wheel is controlled via USB 2.0 and easily adapts to the Alta D2, D7, and D9 bodies, as well as to AP systems.
- Max. filter thickness: 5mm
- Weight: 3.5 lbs. (1.6 kg) with filters
- Thickness: 1.0” (2.54 cm) with mounting plate
- Camera mount method: Adapter plate attached to any Alta camera
- Mechanical mount: 3” 24 threads/inch
- Power input: 12V DC
- Interface: USB 2.0
Alta cameras offer the best warranty in the business, and for good reason: Apogee's Alta Camera Series focuses on quality and reliability so you can focus on innovation and discovery. With a lifetime warranty against condensation in the inner chamber, and a two year parts and labor warranty, including the CCD, we have the best warranty in the industry. If you've got an out-of-box issue with one of our cameras, we're the only company that pays for shipping both ways. Why do we offer such an outstanding warranty? Because Alta cameras are rock solid from day one.
Front Illuminated Full Frame CCD
Back Illuminated Full Frame CCD
|Name||Apogee - KAF 16803 Imaging Systems - Alta U16M D9F CCD Camera and AFW50-7S Filter Wheel Package|
|Manufacturer||Apogee Imaging Systems|