Replacement Parts

Advance GT (CG5) Altitude Adjustment screws

Motor Assy - AZM/RA for NexStar 6/8 SE Telescopes

Allows telescopes to track the motion of the sky once the telescope is polar aligned. These economy models are single axis (R.A.), DC motor drives. They are powered by one 9-volt alkaline battery (user supplied) which lasts up to 40 hours. A speed rate regulator is included to adjust the speed slightly faster or slower.

Allows telescopes to track the motion of the sky once the telescope is polar aligned. These models are single axis (R.A.), DC motor drives. They are powered by four D-cell batteries (user supplied). 2x and 4x sidereal speeds are available through the included hand controller.

Allows telescopes to track the motion of the sky once the telescope is polar aligned. These models are single axis (R.A.), DC motor drives. They are powered by four D-cell batteries (user supplied). 2x and 4x sidereal speeds are available through the included hand controller.

This flash upgradable Celestron NexStar+ hand control is compatible with all Altazimuth mounted NexStars, including SLT, LCM, SE and CPC series computerized telescopes.

This flash upgradable Celestron NexStar+ hand control is compatible with all Equatorial mounted computerized telescopes, including Advanced, CGEM, CGEM DX and CGE Pro series.

In order to utilize the online firmware updates for your Celestron computerized telescope, you need this programming cable. Cable connects to the PC port on the telescope's drive base.

SILVER BASE COVER, AZM Base cover for the CPC series only