Details
Telescope carrying case for Celestron: C9.25-S, C9.25-SGT, CG-9.25, CG-11, CG-14, CGE 925, CGE 1100, CGE 1400, CM-1100, CM-1400
This case is for the Optical Tube Assembly (OTA) ONLY. The case includes two lockable latches, three steel-reinforced handles, a 3″ by 30″ steel hinge and die-cut foam lining for the telescope optical tube. It can be carried by two people using the two handles on either end or pulled using the attached wheels. The foam is configured at the factory for the 9.25″ optical tube. You simply pull out precut sections to increase the cavity size to match the 11″ or 14″ optical tube. The finder scope and diagonal must be detached and carried separately (14″) or wrapped for protection and inserted in the extra space in the case (11″). An adapter bracket is included for instant accurate repositioning when attaching the finder scope. The wheels must be attached to the case by the customer which is easily accomplished in a few seconds with no tools required. An optional Large-Wheel Upgrade is available (at the time of purchase only).
Outside dimensions of the case are approximately 36 x 21-1/4″ x 19″ and its empty weight is approximately 27.8 lbs. The shipping box is approximately 36-7/8″ x 18-1/2″ x 25-3/4″ (UPS Ground Oversized 2 rate is at 70 lbs) and the shipping weight is approximately 35.6 lbs. All values are subject to slight changes.
This case is for the Optical Tube Assembly (OTA) ONLY. The case includes two lockable latches, three steel-reinforced handles, a 3″ by 30″ steel hinge and die-cut foam lining for the telescope optical tube. It can be carried by two people using the two handles on either end or pulled using the attached wheels. The foam is configured at the factory for the 9.25″ optical tube. You simply pull out precut sections to increase the cavity size to match the 11″ or 14″ optical tube. The finder scope and diagonal must be detached and carried separately (14″) or wrapped for protection and inserted in the extra space in the case (11″). An adapter bracket is included for instant accurate repositioning when attaching the finder scope. The wheels must be attached to the case by the customer which is easily accomplished in a few seconds with no tools required. An optional Large-Wheel Upgrade is available (at the time of purchase only).
Outside dimensions of the case are approximately 36 x 21-1/4″ x 19″ and its empty weight is approximately 27.8 lbs. The shipping box is approximately 36-7/8″ x 18-1/2″ x 25-3/4″ (UPS Ground Oversized 2 rate is at 70 lbs) and the shipping weight is approximately 35.6 lbs. All values are subject to slight changes.
Product Series
JMI Carrying Cases include crush-resistant die-cut foam, contoured to safely hold your telescope during transport. The larger cases are manufactured by JMI with 1/4″ plastic for super strong support. Most cases include an extra handle on one end with wheels on the opposite end for easily maneuvering the case without lifting the entire weight. These attractive and efficiently designed cases are substantially smaller than the original shipping box and even smaller than most soft cases. They protect your investment while making it easier to move your scope from one location to another.
Additional Information
| Model | CASE14OTA |
|---|---|
| Weight | 100.0000 |
