Hard Cases

The case includes die-cut foam lining with compartments for telescope, eyepieces and accessories. The Star Pointer finder scope must be detached and inserted into a foam compartment. The case can be secured by placing a padlock around the two halves of the 7/8″ diameter handle.

This case is for the Optical Tube Assembly (OTA) ONLY. The case includes two lockable latches, three steel-reinforced handles, a 3″ by 30″ steel hinge and die-cut foam lining for the telescope optical tube. It can be carried by two people using the two handles on either end or pulled using the attached wheels.

Telescope carrying case for JMI - RB-66 Reverse Binoculars

The case includes six lockable latches, three steel reinforced handles, a 3″ by 24″ steel hinge and die-cut foam lining with compartments for binoculars, eyepieces and accessories. It can be carried or pulled using the attached wheels. The finder scope must be detached and inserted into a foam compartment.

Outside dimensions of the case are approximately 35-7/8″ x 28-1/8″ x 14″ and its empty weight is about 29 lbs.

The case includes six lockable latches for the removable cover (no hinge), two folding handle bars, four steel-reinforced handles and die-cut foam lining with compartments for telescope, eyepieces, finder scope (must be removed from the telescope and placed in a special vinyl cover included with the case) and accessories. The focuser does not need to be removed before installation. The top of the case is not hinged. It is removed completely to insert or remove the telescope. The case is designed to be maneuvered like a wheelbarrow with the two retractable handle bars and two 10″ pneumatic wheels. Installation of the wheels and support rails is easy and requires two 7/16″ wrenches (or two crescent wrenches). This case is compatible with Peterson ergonomic Get-A-Grip handles.

Outside dimensions of the case are approximately 51-5/8″ x 24-7/8″ x 19″ (assembled with handle bars retracted) and its empty weight is approximately 44.0 lbs. The shipping box is approximately 43-3/8″ x 14-3/4″ x 25-3/4″ (UPS Ground Oversized 2 rate is at 70 lbs) and the shipping weight is approximately 53.0 lbs. All values are subject to slight changes.

Telescope carrying case for Meade - LXD55 SN-8 / SN-10, LXD75 SN-8 / SN-10The Optical Tube Assembly (OTA) case includes two lockable latches, two steel-reinforced handles, a 3″ by 34″ steel hinge and die-cut foam lining with compartments fo

Telescope carrying case for Celestron NexStar 4 SE / 5 SE / 6 SE. NOTE: This case does NOT come with foam and REQUIRES the original packaging foam

Celestron C8-S, C8-SGT, CGE 800, G-8, Great Polaris C8, NexStar 4 / 4GT / 4i / 4 SE / 5 / 5i / 5 SE / 6 SE, Super Polaris C8; Meade ETX-90 (non-EC version), ETX-90EC, ETX-90PE, ETX-105EC, ETX-105PE, ETX-125EC, ETX-125PE, GEM mounted 2080, LXD55 SC-8, LXD7