German Equatorial

• Maximum 7 arcseconds peak-to-peak periodic error PEC
• Completely redisgned control system featuring USB 2.0 computer to mount interface
• Calibrated polar alignment polar adjustments
• Belt-driven gears offer virtually zero backlash
• Unibody mount design weighs 84Ib (38kg)
• 240Ib (109kg)total instrument capacity (480 Ib/218 kg total capacity)
• Ample room to add through the mount cabling
• Power supply and PC to mount cabling included
• Versatile equipment mounting plate (a.k.a. the Versa-Plate) that can accept virtually any optic
• All electronics and wiring are enclosed within in the mount (power supply is external)
• 30 arcsecond or better all sky pointing accuracy with TPoint and Super Model
• Clutchless design maintains TPoint assisted pointing accuracy
• Two port USB 2.0 hub on Instrumental Panel

With a weight capacity of up to 25 pounds, the Takahashi EM-11 Temma IIM "GoTo" mount is made for small to medium sized loads.

The EM-200 Temma II is an accurate, precision-built GoTo German equatorial mount that provides a stable platform for payloads of up to 40 pounds. It is an ideal mount for any type telescope, be it a refractor, reflector, or cassegrain

The EM-200 USD III accommodates the Mewlon 250, CN-212, or TOA -130 beautifully. Comes with two-5 kg (11.02 lb.) counterweights, hand controller, and power cable.Integrated polar alignment scope with illumination.

Please consider TSM60001 TemmaII as a replacement mount

EM-2500 Temma II GoTo 400X Observatory Mount & Pier. 2.5 arc second accuracy. Mount weighs 700 lbs. with pier.

EM-3500 Temma II GoTo 400X Observatory Mount & Pier. 2.5 arc second accuracy. Mount weighs 2000 lbs. with pier.

The new EM-400 mount has been developed to fill in the gap between the NJP and larger EM-500 mount. This new mount has been designed to carry an 85 lb load.This mount disassembles into three sections, the R.A

EM-500 has a tracking accuracy of +/- 3.5 arc seconds without periodic error correction.Temma II GoTo system slews at 560X sidereal rate. Can be operated via The Sky, Level IV.Comes with illuminated polar finder. Tripod or pier optional

A more flexible replacement for the previous and discontinued P-2Z equatorial mount by Takahashi.

This ingeniously designed equatorial mount is really lightweight and portable: It weighs only 7-3/4 lbs (3-1/2kg) and, with the 5-1/2" long counterweight shaft removed, will fit in a 7" X 8" X 3-3/4" space! Takahashi suggests a 5 pound

The sleek design of the AXD Equatorial Mount covers innovative gearing (View here) for superior performance. Controlled by Vixen's new STAR BOOK TEN, the AXD combines all the features that the serious astronomer has been waiting for. The AXD Mount was names a 2011 Star Product by Astronomy Magazine.

The GP2 mount's aluminum die-cast body is strong and light with accurate tracking accomplished by dual 144-tooth aluminum worm wheels and a brass R.A. worm gear machined to better than 0.002-mm tolerance.

The GP2 mount's aluminum die-cast body is strong and light with accurate tracking accomplished by dual 144-tooth aluminum worm wheels and a brass R.A. worm gear machined to better than 0.002-mm tolerance.

The GPD2 equatorial mount are the last of our demonstration product with full warranty.They are stronger and heftier of the GP mounts. With its solid steel R. A. and Declination axes and brass worm gears, this mount will hold up to years of heavy use.

The GPD2 equatorial mount is the stronger and heftier of the GP mounts. With its solid steel R. A. and Declination axes and brass worm gears, this mount will hold up to years of heavy use.

While the outsides might look similar to the standard Sphinx Mount, the changes that have been made are huge! Incorporating one piece hardened steel RA and DEC shafts with needle bearings throughout, the new Sphinx D can handle a load capacity up to 50 lbs.