Learn MoreModel#: PSS0001
12V/26AH Gel cell battery with charger.... Learn MoreModel#: PSS0002
Takahashi TRI0001 Red LED Illuminator was design for Takahashi 7X50 and 11X50 Finder Scopes as well as Takahashi 5mm illuminated reticule guiding eyepieces.Cordless Red LED light source powered by two LR44/SR44/MR44 camera batteries (supplied)... Learn MoreModel#: TRI0001
Use this large adapter plate to attach a Takahashi Mewlon 250 OTA to a Losmandy mount.... Learn MoreModel#: TAA0250
This Band adapter allows 2-hole (8mm X 1.25 screws) Takahashi tube holders, and other accessories that match that pattern, to attach to the NJP, a 4-hole mount.... Learn MoreModel#: TBA0100
The Takahashi 2x Barlow Extender is excellent when using it in combination with apochromatic refractors. This accessory is multi-coated, can be used with a diagonal and is built with a compression rings for eyepiece security.... Learn MoreFREE SHIPPINGModel#: TBL0002(48 States)
The Feldstein adapter is used for focuser ends found on some Takahashi telescopes to mate items such as a camera to the telescope - or the other end has SCT thread which allows use of SCT-threaded items such as visual backs, T-adapters, etc.... Learn MoreModel#: TCD0002
The Feldstein adapter is used for focuser ends found on some Takahashi telescopes to mate items such as a camera to the telescope - or the other end has SCT thread which allows use of SCT-threaded items such as visual backs, T-adapters, etc.... Learn MoreModel#: TCD0006
The Feldstein adapter is used for focuser ends found on some Takahashi telescopes to mate items such as a camera to the telescope - or the other end has SCT thread which allows use of SCT-threaded items such as visual backs, T-adapters, etc.... Learn MoreModel#: TCD0007
The Takahashi TCD0018 is a 29.7mm Spacer/Adapter for the Sky-90, FS-60C, or "New Q" FSQ-106ED Reducer when using an SBIG ST-Series Camera with CFW-8 filter wheel. Measurements are 29.7mm x 55.9mm x .75 female to male T-thread adapter.... Learn MoreModel#: TCD0018
Regular Price: $163.00
Special Price: $138.55
The Takahashi TCD0012STL Adapter was designed specifically to attach a SBIG ST-Series CCD camera and color filter wheel attached to a Takahashi Mewlon Telescope.... Learn MoreModel#: TCD0327
Great tool for collimating a Newtonian or Cassegrain telescope. This item should be used with Takahashi collimating tube (sold separately).... Learn MoreModel#: TCE0020
Tube with crosshair for use with collimating eyepiece (sold separately). For collimating Newtonian telescopes.... Learn MoreModel#: TCE0030
Designed for use on refractor, Ritchey-Chrieten and classical Cassegrain telescopes. The Takahashi Collimating Telescope is also used on the Takahashi CN-212, Mewlons and refractors of 820mm or more in focal length... Learn MoreFREE SHIPPINGModel#: TCE0100(48 States)
Add GoTo capabilities to your NJP mount with this 350X Temma II Conversion Kit. Includes software & cables. A PC or the optional Temma Hand Controller is required for GoTo operations.... Learn MoreFREE SHIPPINGModel#: TCK0001(48 States)
Add GoTo capabilities to your EM-200 USD (not USD III) mount with this 250X Temma II, Jr. Conversion Kit. Includes encoders, electronics, control box, cables and software.... Learn MoreFREE SHIPPINGModel#: TCK0002(48 States)
Add GoTo capabilities to your EM-10 USD (not USD III) mount with this 250X Temma II, Jr. Conversion Kit. Includes encoders, electronics, control box, cables and software.... Learn MoreFREE SHIPPINGModel#: TCK0003(48 States)
Learn MoreFREE SHIPPINGModel#: TCK0004(48 States)
Takahashi began manufacturing telescopes in 1967 their 35th year of business. They began and remain in the sand casting business today.
Their first model was TS-65 a 65mm x 900mm achromat. By 1969 they produced their first 65mm triplet semi-apochromat and 100mm f/10 reflector in 1969.
The TS80 built in April of 1972 was the first triplet apochromat Takahashi telescope built. Then in 1973 their first fluorite triplet telescope was used too photograph the total solar eclipse on June 29th of that year in Africa. It was an 80mm x 1200mm and in the same year they produced their first equatorial mount with a polar telescope.
In 1977 Takahashi introduced their second triplet fluorite apochromat the TS-90 a 90mm x 1000mm and the 90S mount and the famous JP mount in 1979. The NJP mount as it is called today is still in production. The JP and NJP mounts can be converted to Takahashi’s Temma “go to” system. This is a testament to its timeless design. Then followed by the introduction of famous Sky Patrol portable mount in 1981, this mount was a favorite for eclipse chasers. It features a polar alignment telescope in the R.A. shaft and integral 40mm guide scope. In that year the fluorite Series FC 65, 78, 100, and 125 were introduced. This series remained in production until 1994.
Takahashi developed the camera angle adjuster which is a bearing device that allows the camera or ocular to be rotated 360° without loss of focus. This rotator device is still used today for all Takahashi focuser from the 2” to 4” focusers and all astrographs.
From this time Takahashi used a compression ring ocular holder to provide precise centering of the ocular and optics of the telescope.
In 1983 introduced their Epsilon Series of Hyperbolic flat field astrographs with the 130, 160, 200, 250 and 300. Takahashi was able to perfect the process for grinding hyperbolic mirrors and is doing so today for its current Epsilons and corrected RC astrographs. This was also the year they introduced the prototype FCT-150 fluorite triplet apochromat and the revolutionary EM-2000 mount which used electric clutches and had a direct read out of R.A. and Dec. This mount could be transported to remote sites because it broke down into three parts.
In 1985 the triplet FCT Series included a 65, 76, 100, 125 and 150mm fluorite triplets. The Mewlon Series Dall-Kirkham Cassegrain telescopes were the next series in sizes of 180, 210, 250 and 300mm were developed along with the CN-212, a convertible 212mm classical Cassegrain f/12 and corrected Newtonian convertible telescope.
In 1989 Takahashi introduced their famous TSC-225: a 225mm Schmidt-Cassegrain with innovations such as 10 baffles in the baffle tube and a rear cell fan for cooling of the optics. The 225 used white German optical glass for its corrector plate. Ever the innovator Takahashi produced the carbon fiber Epsilon-250 in 1992 closely followed by the carbon fiber Epsilon-210 hyperbolic astrographs.
Takahashi also makes observatory telescopes which include: 350mm hyperbolic astrographs, 300 and 400mm Cassegrains, 200, 250 and 300mm triplet apochromatic refractors and the large EM-3500 mounts to carry them.
Takahashi’s manufacture of refractors, Newtonian reflectors, Cassegrain/Newtonians, classical Cassegrains, hyperbolic astrographs, corrected Baker RC astrographs, mounts and oculars makes it one of the most versatile companies of its type in the world.
The current line of Ortho Apochromatic refractors use a design that is absolutely color free, will include a 110mm, 130mm [currently produced], 150mm [introduced 06/05] and a 180mm. Coming also is a line of Ortho Astrographs.
Their manufacturing facilities are located in Urii, Japan with their headquarters located in the Itabahsi prefecture of Tokyo. The facilities include the main assembly and design facility where the instruments and optics designed, are tested and assembled. The second is the sand casting factory. The third is the facility where the observatory mounts the EM-3500 and EM-2500 are assembled along with the machining shop next door to their warehouse facility. The fourth is the mirror grinding, polishing and testing building.
Takahashi’s staff includes: optical, design and mechanical engineers many of whom are amateur astronomers, who have discovered new asteroids one of which was named Urii in honor of the city where the Takahashi manufacturing facilities are located.