Narrow Your Results
- Category
-
- Accessories (9)
- CCD Cameras (9)
- Product Series
Optec
17 Item(s)
-
Optec - USB to Serial Converter 4-Port.
4-Port USB to Serial Converter adapts the SSP serial output to a USB 2.0 interface. Four seperate COM ports allow all of the Optec instruments to interface to a single USB port ... Learn More
Model#: 17691
$175.00 -
-
Optec - SSP-5 Carrying & Storage Case.
Store your valuable instrument in a solid hardwood case made from various Michigan hardwoods such as elm, walnut, oak or maple supplied from a local wood mill.
... Learn MoreModel#: 17205
$145.00 -
-
Optec - SSP-3 or SSP-4 Carrying & Storage Case
The case contains enough room for the instrument, power supply, PC cable and extra filter sliders. A rechargeable desiccant container keeps the instrument dry. A neoprene gasket keeps all dust from entering the case. All brass hardware. Quality American made for a change!
... Learn MoreModel#: 17200
$145.00 -
Optec - Sloan r' filter for SSP-3 or SSP-5 photometer.
Optec - Sloan r' filter ... Learn More
Model#: 17028
$125.00 -
Optec - Sloan i´ filter for SSP-3 or SSP-5 photometer with R6358 PMT.
Optec - Sloan i´ filter ... Learn More
Model#: 17029
$125.00 -
Optec - Sloan g' (acute); filter for SSP-3 or SSP-5 photometer.
Optec - Sloan g' (acute); filter for SSP-3 or SSP-5 photometer. ... Learn More
Model#: 17027
$125.00 -
Optec - Remote IN/OUT Keypad
The plastic control box for the TCF-S focuser was never intended for frequent use at the telescope using it in a manual operating mode ... Learn More
Model#: 17680
$139.00 -
Optec - Lepus 6.2 Telecompressor
The Lepus 0.62X is a new 4-element telecompressor available from Optec that has been specifically designed to work with newer Schmidt-Cassegrain telescopes such as the Meade ACF or the Celestron EdgeHD optical tube assemblies.
... Learn MoreModel#: 19407
$199.00 -
Optec - Hb narrow and wide band filter set with R6358 or R6350 PMT
Set of two interference filters used to study the strength of Hß absorption at 4861Å. The narrow band filter has a halfwidth (FWHM) of 3 nm and the wide band filter has a halfwidth of 15 nm ... Learn More
Model#: 17049
$179.00 -
Optec - Dichroic RED-IR filter for RGB Imaging, Multilayer AR coating, 2.0 +/- 0.1mm thick.
Optec - Dichroic RED-IR filter for RGB Imaging ... Learn More
Model#: 17246
$135.00 -
Optec - Dichroic Luminance filter w/IR-Blocking for LRGB Imaging, Multilayer AR, 2.0 +/- 0.1mm thick
Optec Luminance Filter w/ IR Blocking - 50mm Unmounted ... Learn More
Model#: 17241
$125.00 -
Optec - Dichroic GREEN-IR filter for RGB Imaging, Multilayer AR coating, 2.0 +/- 0.1mm thick.
Optec 50mm Dichroic Green-IR Filter ... Learn More
Model#: 17247
$135.00 -
Optec - Dichroic BLUE-IR filter for RGB Imaging, Multilayer AR coating, 2.0 +/- 0.1mm thick.
Optec - Dichroic BLUE-IR filter for RGB Imaging ... Learn More
Model#: 17248
$135.00 -
Optec - AP2.7 x 24tpi Extension Tube Set, 5-piece.
Includes ½”, ¾”, 1”, 1- ½”, and 3” extensions (#19891 through #19895)AP2 ... Learn More
Model#: 19881
$150.00 -
Optec - AP2.7 x 24tpi Extension Tube Set, 4-piece.
Provides ¼” incremental extensions from ½” to 3-¼” Includes ½”, ¾”, 1”, and 1- ½” extensions (#19891 through #19894)AP2 ... Learn More
Model#: 19880
$115.00
17 Item(s)
Optec, Inc. is located in Lowell, Michigan, just east of the Grand Rapids metropolitan area. For many years now the company has been in the forefront of research and development of astronomical, visibility, and video/CCD microscopy optical instruments for both amateurs and professional alike.
Optec was incorporated in 1979 and is the successor to DOAA Enterprises; a Detroit based company founded by an Oakland University college student, Gerald Persha. Under the leadership of Persha, Optec has grown from a small basement operation to a corporation employing 7 technicians, machinists, and sales staff. Optec's roots are founded strongly in astronomical research instrumentation with products such as the SSP line of solid-state photometers, photomultiplier tube and CCD photometers, the patented TCF- temperature compensated focuser and the recent addition of the Pyxis 3-inch, a high precision camera field rotator for large telescopes.
Optec has a support staff of many diverse and qualified individuals, who take great pride in their accomplishments at the company.
Optec maintains and uses the Optec Observatory, a small observatory and testing laboratory for Optec's astronomical product line. Using a Meade 10" LX200 telescope and CCD cameras from SBIG. In addition to the Optec SSP single channel photometer line, the Optec Observatory is fully computer controlled with separate control room and observing deck. Recent additions to the observatory now allow remote operations of the telescope, photometer, and CCD camera control software.
In addition to the astronomical product line, Optec designs and manufactures optical couplers for video/CCD microscopy, atmospheric visibility measuring instruments such as the Model LPV transmissometer and the NGN integrating nephelometer. These unique instruments are used to monitor the air quality in many of the national parks in the USA as part of the Improve Network.
