Narrow Your Results
- Category
-
- Accessories (83)
- CCD Cameras (54)
- Product Series
-
- Optec 0.5 inch Diameter Round Filters for SSP Photometers (12)
- Optec 2 inch Drawtube Adapters for TCF-S (5)
- Optec 50mm Diameter Round Filters for IFW Filter Wheels - unmounted (13)
- Optec Adapters for OPTEC-2400 Mount (17)
- Optec Adapters for OPTEC-3600 Mount (21)
- Optec AP 2.7x24tpi Threaded Adapters and Extentions (6)
- Optec Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9 (4)
- Optec Mounted 2 inch Diameter Round filters (9)
- Optec OPTEC-2300 Camera Adapters (8)
- Optec OPTEC-2380 Threaded Mounting Rings (10)
- Optec OPTEC-3000 3-inch Adapters (7)
- Optec RJ-12 Reverse Cable for use with 17695 converter (5)
- Optec Serial Cables (4)
Optec
-
Optec Lepus Camera Adapter- QHY 8 Camera 19392-81
Compatible with the Optec 0.62x Lepus Reducer and the QHY-8 CCD camera ... Learn More
Model#: 19329-81
$60.00 -
Optec - VSI SideWinder 2.9-" dovetail mount to OPTEC-3600 dovetail adapter.
The VanSlyke SideWinder has a 2.9-inch diameter dovetail receiver. Our #17821 mount is a male 2.9" dovetail to our larger 3.6" dovetail for attaching any device with an OPTEC-3600 receiver.Overall Height: 0.69" (17 ... Learn More
Model#: 17821
$95.00 -
Optec - Vixen VMC260 telescope mount to OPTEC-3600 dovetail adapter.
The Vixen VMC mount screws directly into the fine 65mm male thread of the Vixen VMC Telescopes including the VMC260. This mount presents the OPTEC-3600 dovetail for attachment of any device with an OPTEC-3600 receiver.Overall Height: 0 ... Learn More
Model#: 17819
$95.00 -
Optec - Violet rejection filter, 50mm diam x 2mm thick.
Most refractor optics including apochromatic telescopes are not ... Learn More
Model#: 17229
$30.00 -
Optec - Violet light rejection filter, mounted in 48mm threaded cell.
Violet Light Rejection - Blocks the UV and violet light shorter than 420nm. Most refractor optics including apochromatic telescopes are not well corrected in the short wavelengths ... Learn More
Model#: 17430
$30.00 -
Optec - USB to Serial Converter 1-Port.
USB to Serial Converter adapts the SSP serial output to a USB 2.0 interface. Single port converter.IMPORTANT: Not all USB-to-Serial converters are compatible with Optec software ... Learn More
Model#: 17690
$30.00 -
-
Optec - Universal Mounting Ring for MAXfield/WideField or any 2" barrel accessory.
The mounting ring screws into the large, coarse thread on ... Learn More
Model#: 17460
$59.00 -
Optec - TMB 4.3-" thread mount to OPTEC-3600 dovetail adapter.
The TMB 4.3-inch mount screws directly into the large 4.3" receiver of the TMB apochromats including the TMB-130. This mount presents the OPTEC-3600 dovetail for attachment of any device with an OPTEC-3600 receiver ... Learn More
Model#: 17814
$95.00 -
Optec - TeleVue 3" male threaded mount for NP101 to OPTEC-2400 dovetail adapter.
The #17652 Televue 3-inch mount screws directly onto the NP101 male thread and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver.Outside Diameter: 3.45" (87.6mm)Overall Height: 0.89" (22 ... Learn More
Model#: 17652
$69.00 -
Optec - TCF-S Technical Manual, printed and bound
Complete description of the TCF-S temperature compensating focuser with serial interface protocol, circuit diagrams, and theory of operation ... Learn More
Model#: 17339
$10.00 -
Optec - TCF Mounting Ring for TCF-S focuser or any OPTEC-2400 receiver.
The mounting ring screws into the large, coarse thread on ... Learn More
Model#: 17461
$59.00 -
Optec - Takahashi FS-78 mount, fits the 2.2-" thread directly to OPTEC-2400 dovetail adapter.
The Takahashi 2.2" mount fits the FS-78 telescope drawtube directly. This adapter presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver, including the TCF-S focuser and IFW intelligent filter wheel ... Learn More
Model#: 17656
$63.00 -
Optec - Takahashi 89mm threaded mount to OPTEC-3600 dovetail adapter.
Takahashi's Mewlon 300 has a rear female thread 89mm in diameter and requiring a slight stand-off ... Learn More
Model#: 17825
$95.00 -
Optec - Takahashi 2.8" (72mm) male mount, fits the Takahashi Mewlon 210 and 250, to OPTEC-2400.
The #17651 Takahashi 2.8-inch mount screws directly onto the 72mm male thread of the Mewlon series telescopes and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver.Outside Diameter: 3 ... Learn More
Model#: 17651
$84.00 -
Optec - Takahashi 2.8" (72mm) female threaded mount to OPTEC-2400 dovetail adapter.
The #17453 Takahashi 2.8-inch (72mm) female mount screws directly onto the 72mm female thread of the FS-102, FS-128, and FS-152 with the TKP27113 89mm adapter ring ... Learn More
Model#: 17453
$84.00 -
Optec - Takahashi 2.8" (72mm) female mount to OPTEC-3600 dovetail adapter.
... Learn More
Model#: 17809
$95.00 -
Optec - Takahashi 2.5" (63mm) male threaded mount to OPTEC-2400 dovetail adapter.
he Takahashi 2.5" mount fits the Sky 90 telescope drawtube with the TKP35001 coupling removed ... Learn More
Model#: 17451
$84.00 -
Optec - T-thread to Nikon adapter
#17650 - T-thread to Nikon adapter. Allows the popular Nikon digital cameras to attach to the #17646 Pyxis T-thread camera mount ... Learn More
Model#: 17650
$25.00 -
Optec - T-Thread Mounting Ring with 42mm T-thread for direct camera coupling.
This 42mm T-Thread mount allows IFW and ... Learn More
Model#: 17465
$59.00
Optec, Inc. is located in Lowell, Michigan, just east of the Grand Rapids metropolitan area. For many years now the company has been in the forefront of research and development of astronomical, visibility, and video/CCD microscopy optical instruments for both amateurs and professional alike.
Optec was incorporated in 1979 and is the successor to DOAA Enterprises; a Detroit based company founded by an Oakland University college student, Gerald Persha. Under the leadership of Persha, Optec has grown from a small basement operation to a corporation employing 7 technicians, machinists, and sales staff. Optec's roots are founded strongly in astronomical research instrumentation with products such as the SSP line of solid-state photometers, photomultiplier tube and CCD photometers, the patented TCF- temperature compensated focuser and the recent addition of the Pyxis 3-inch, a high precision camera field rotator for large telescopes.
Optec has a support staff of many diverse and qualified individuals, who take great pride in their accomplishments at the company.
Optec maintains and uses the Optec Observatory, a small observatory and testing laboratory for Optec's astronomical product line. Using a Meade 10" LX200 telescope and CCD cameras from SBIG. In addition to the Optec SSP single channel photometer line, the Optec Observatory is fully computer controlled with separate control room and observing deck. Recent additions to the observatory now allow remote operations of the telescope, photometer, and CCD camera control software.
In addition to the astronomical product line, Optec designs and manufactures optical couplers for video/CCD microscopy, atmospheric visibility measuring instruments such as the Model LPV transmissometer and the NGN integrating nephelometer. These unique instruments are used to monitor the air quality in many of the national parks in the USA as part of the Improve Network.
