Happily Serving You in the Same Location for Over 58 Years!

Welcome!

Optec

Items 21 to 40 of 97 total

per page
Page:
  1. 2

Set Descending Direction
  1. Optec - #23A Light Red, mounted in 48mm threaded cell.

    Optec - #23A Light Red, mounted in 48mm threaded cell.

    #23A Light Red - Blocks blue and green light completely. Passes light longer than 600nm ... Learn More
    Model#: 17435
    $45.00

  2. Optec - Clear filter window for any SSP Photometer

    Optec - Clear filter window for any SSP Photometer

    Optec - Clear filter window for ... Learn More
    Model#: 17036
    $50.00

  3. Optec - Pyxis STL camera mount with OPTEC-2300 male dovetail.

    Optec - Pyxis STL camera mount with OPTEC-2300 male dovetail.

    #17644 - Pyxis STL camera mount. The SBIG STL camera is one of the largest cameras that can be attached to the Pyxis ... Learn More
    Model#: 17644
    $59.00

  4. 17460

    Optec - Universal Mounting Ring for MAXfield/WideField or any 2" barrel accessory.

    The mounting ring screws into the large, coarse thread on ... Learn More
    Model#: 17460
    $60.00

  5. 17465

    Optec - T-Thread Mounting Ring with 42mm T-thread for direct camera coupling.

    This 42mm T-Thread mount allows IFW and ... Learn More
    Model#: 17465
    $60.00

  6. Optec - Pyxis SCT short threaded camera mount.

    Optec - Pyxis SCT short threaded camera mount.

    #17648 & #17657 - Pyxis SCT thread mount. Some cameras from Apogee and others use this 2" x 24 TPI thread. This thread also is common for the small MeadeCelestron telescopes, AO-7 and f/6.3 reducer ... Learn More
    Model#: 17648
    $60.00

  7. 17464

    Optec - ST-1001E Mounting Ring for SBIG ST-1001E CCD camera. (OBSOLETE only a few units left)

    The mounting ring screws into the large, coarse thread on ... Learn More
    Model#: 17463
    $60.00

  8. 17468

    Optec - Pentax Threaded Mounting Ring for IFW.

    This Pentax Thread mount allows ... Learn More
    Model#: 17468
    $60.00

  9. Optec - Pyxis T-thread camera mount.

    Optec - Pyxis T-thread camera mount.

    #17646 - Pyxis T-thread camera mount. Most CCD cameras used in astronomy use this type of threaded mount. This adapter allows use of the NextGEN (0.33X and 0.50X only) reducers to work with most SBIG cameras without the CFW wheel ... Learn More
    Model#: 17646
    $60.00

  10. Optec Lepus Camera Adapter- QHY 8 Camera 19392-81

    Optec Lepus Camera Adapter- QHY 8 Camera 19392-81

    Compatible with the Optec 0.62x Lepus Reducer and the QHY-8 CCD camera ... Learn More
    Model#: 19329-81
    $60.00

  11. 17461

    Optec - TCF Mounting Ring for TCF-S focuser or any OPTEC-2400 receiver.

    The mounting ring screws into the large, coarse thread on ... Learn More
    Model#: 17461
    $60.00

  12. 17466

    Optec - C-mount Mounting Ring for C-mount cameras.

    Optec - C-mount Mounting Ring for ... Learn More
    Model#: 17466
    $60.00

  13. Optec - Pyxis QSI Camera Mount.

    Optec - Pyxis QSI Camera Mount.

    The QSI 4-Bolt mount attaches directly to QSI camera systems and ... Learn More
    Model#: 17643
    $60.00

  14. Optec - Pyxis C-thread camera mount.

    Optec - Pyxis C-thread camera mount.

    #17649 - Pyxis C-thread mount. Most video cameras use the 1" x 32 TPI thread standard. This adapter will allow the use of the NextGEN (0.33X and 0 ... Learn More
    Model#: 17649
    $60.00

  15. Optec - SCT Threaded Mounting Ring with male 2" short thread. Intended for some Apogee cameras

    Optec - SCT Threaded Mounting Ring with male 2" short thread. Intended for some Apogee cameras

    The mounting ring screws into the large, coarse thread on the back of ... Learn More
    Model#: 17464
    $60.00

  16. Optec - Pyxis Pentax camera mount.

    Optec - Pyxis Pentax camera mount.

    #17647 Pyxis Pentax camera mount. A few CCD cameras still use this thread standard for mounting. Not very popular at this time ... Learn More
    Model#: 17647
    $60.00

  17. Optec - Pyxis SCT long threaded mount

    Optec - Pyxis SCT long threaded mount

    #17648 & #17657 - Pyxis SCT thread mount. Some cameras from Apogee and others use this 2" x 24 TPI thread. This thread also is common for the small MeadeCelestron telescopes, AO-7 and f/6.3 reducer ... Learn More
    Model#: 17657
    $60.00

  18. 17462

    Optec - JMI MotoFocus Mounting Ring for JMI NGF-S motorized focuser.

    The mounting ring screws into the large, coarse thread on ... Learn More
    Model#: 17462
    $60.00

  19. 17467

    Optec - SCT Threaded Mounting Ring with male 2" long thread. Intended to fit Visual Back accessories

    Optec - SCT Threaded Mounting Ring with male 2" long thread. Intended ... Learn More
    Model#: 17467
    $60.00

  20. Optec - T-thread to Nikon adapter

    Optec - T-thread to Nikon adapter

    #17650 - T-thread to Nikon adapter. Allows the popular Nikon digital cameras to attach to the #17646 Pyxis T-thread camera mount ... Learn More
    Model#: 17650
    $60.00

Items 21 to 40 of 97 total

per page
Page:
  1. 2

Set Descending Direction

Optec, Inc. is located in Lowell, Michigan, just east of the Grand Rapids metropolitan area. For many years now the company has been in the forefront of research and development of astronomical, visibility, and video/CCD microscopy optical instruments for both amateurs and professional alike.

Optec was incorporated in 1979 and is the successor to DOAA Enterprises; a Detroit based company founded by an Oakland University college student, Gerald Persha. Under the leadership of Persha, Optec has grown from a small basement operation to a corporation employing 7 technicians, machinists, and sales staff. Optec's roots are founded strongly in astronomical research instrumentation with products such as the SSP line of solid-state photometers, photomultiplier tube and CCD photometers, the patented TCF- temperature compensated focuser and the recent addition of the Pyxis 3-inch, a high precision camera field rotator for large telescopes.

Optec has a support staff of many diverse and qualified individuals, who take great pride in their accomplishments at the company. 

Optec maintains and uses the Optec Observatory, a small observatory and testing laboratory for Optec's astronomical product line. Using a Meade 10" LX200 telescope and CCD cameras from SBIG. In addition to the Optec SSP single channel photometer line, the Optec Observatory is fully computer controlled with separate control room and observing deck. Recent additions to the observatory now allow remote operations of the telescope, photometer, and CCD camera control software. 

In addition to the astronomical product line, Optec designs and manufactures optical couplers for video/CCD microscopy, atmospheric visibility measuring instruments such as the Model LPV transmissometer and the NGN integrating nephelometer. These unique instruments are used to monitor the air quality in many of the national parks in the USA as part of the Improve Network.