Happily Serving You in the Same Location for Over 58 Years!

Welcome!

Optec

Items 21 to 40 of 194 total

per page
Page:
  1. 2

Set Descending Direction
  1. 17416
  2. Optec - PlaneWave CDK 12.5 mount to OPTEC-2400 dovetail adapter.

    Optec - PlaneWave CDK 12.5 mount to OPTEC-2400 dovetail adapter.

    The  PlaneWave 12.5" CDK mount fits the rear pinch-plate cover of the rear cell and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver ... Learn More
    Model#: 17417
    $95.00

  3. 17418

    Optec - PlaneWave CDK 17/20 mount to OPTEC-2400 dovetail adapter.

    The  PlaneWave 17 / 20 CDK mount fits the rear pinch-plate cover of the rear cell for either PlaneWave 17" or 20" CDK telescope and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver ... Learn More
    Model#: 17418
    $95.00

  4. Optec - Takahashi 2.5" (63mm) male threaded mount to OPTEC-2400 dovetail adapter.

    Optec - Takahashi 2.5" (63mm) male threaded mount to OPTEC-2400 dovetail adapter.

    he  Takahashi 2.5" mount fits the Sky 90 telescope drawtube with the TKP35001 coupling removed ... Learn More
    Model#: 17451
    $85.00

  5. Optec - Takahashi 2.8" (72mm) female threaded mount to OPTEC-2400 dovetail adapter.

    Optec - Takahashi 2.8" (72mm) female threaded mount to OPTEC-2400 dovetail adapter.

    The #17453 Takahashi 2.8-inch (72mm) female mount screws directly onto the 72mm female thread of the FS-102, FS-128, and FS-152 with the TKP27113 89mm adapter ring ... Learn More
    Model#: 17453
    $95.00

  6. 17454

    Optec - Meade/Celestron Mount for 2" Rear Cell Thread, Meade/Celestron 8", Celestron 9.25" telescopes

    The  Meade and Celestron SCT 2-inch mount screws directly onto the standard 2-inch 24tpi (threads per inch) diameter male thread on most Schmidt-Cassegrain Telescopes and presents the OPTEC-2400 dovetail for attachment of any device with ... Learn More
    Model#: 17454
    $65.00

  7. Optec - Meade Telescope Mount for 3" Rear Cell Thread, Meade 10", 12" and 14" telescopes.

    Optec - Meade Telescope Mount for 3" Rear Cell Thread, Meade 10", 12" and 14" telescopes.

    The  Meade 3-inch mount screws directly onto the larger 3-inch diameter male thread of the 10"/12"/14" class Schmidt Cassegrain Telescopes ... Learn More
    Model#: 17455
    $75.00

  8. Optec - Meade Telescope Mount for 4" Rear Cell Thread, Meade 16" telescopes.

    Optec - Meade Telescope Mount for 4" Rear Cell Thread, Meade 16" telescopes.

    he  Meade 16" LX200 series SCT  4-inch mount screws directly onto the large 4-inch diameter male thread and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver ... Learn More
    Model#: 17456
    $95.00

  9. Optec - Celestron Telescope Mount for 3" Rear Cell Thread, Celestron C-11/C-14 telescopes.

    Optec - Celestron Telescope Mount for 3" Rear Cell Thread, Celestron C-11/C-14 telescopes.

    The  Celestron 3-inch mount screws directly onto the larger 3-inch diameter male thread and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver ... Learn More
    Model#: 17457
    $75.00

  10. Optec - AstroPhysics 2.7" male threaded mount to OPTEC-2400 dovetail.

    Optec - AstroPhysics 2.7" male threaded mount to OPTEC-2400 dovetail.

    The AstroPhysics 2.7-inch mount screws directly into the AP female thread and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver.Overall Height: 0.85" (21.6mm)Clear Aperture: 2.15" (54 ... Learn More
    Model#: 17458
    $85.00

  11. Optec - 2" Barrel Mount (male) to OPTEC-2400 dovetail.

    Optec - 2" Barrel Mount (male) to OPTEC-2400 dovetail.

    The #17652 Televue 3-inch mount screws directly onto the NP101 male thread and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver.Outside Diameter: 2.7" (68.5mm)Overall Height: 2.40" (61 ... Learn More
    Model#: 17459
    $75.00

  12. Optec - 6-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    Optec - 6-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    The control cable is comprised of an eight wire CAT 5 cable with ... Learn More
    Model#: 17470
    $30.00

  13. 17471

    Optec - 12-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    The control cable is comprised of an eight wire CAT 5 cable with ... Learn More
    Model#: 17471
    $40.00

  14. 17472

    Optec - 25-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    The control cable is comprised of an eight wire CAT 5 cable with ... Learn More
    Model#: 17472
    $50.00

  15. 17473

    Optec - 50-foot Control Cable, Hand Controller to TCF-S/IFW, RJ-45 to DB-9.

    The control cable is comprised of an eight wire CAT 5 cable with ... Learn More
    Model#: 17473
    $60.00

  16. 17481

    Optec - 3" Receiver Tube to accept NGC 318 f/7.5 Reducer / Corrector.

    The FLI PDF focuser uses three long cone point setscrews to connect to this adapter's V-groove.  The PDF has a 4.1-inch diameter, 1/4" deep pocket which this mount fits into ... Learn More
    Model#: 17481
    $95.00

  17. Optec - L Mounting Bracket with 1/4 - 20 thread.

    Optec - L Mounting Bracket with 1/4 - 20 thread.

    #17640 - L mounting bracket with 1/4 -20 thread. This L shaped bracket allows the Pyxis to be mounted on a side support or optical bench ... Learn More
    Model#: 17640
    $25.00

  18. Optec - Pyxis 2-" I.D. Camera Field Rotator.

    Optec - Pyxis 2-" I.D. Camera Field Rotator.

    The original Pyxis rotator push-fits into any 2-inch focuser or receiver. The camera side of this rotator has a receiver for the OPTEC-2300 dovetail ... Learn More
    FREE SHIPPING
    (48 States)
    Model#: 17645
    $995.00

  19. Optec - Takahashi 2.8" (72mm) male mount, fits the Takahashi Mewlon 210 and 250, to OPTEC-2400.

    Optec - Takahashi 2.8" (72mm) male mount, fits the Takahashi Mewlon 210 and 250, to OPTEC-2400.

    The #17651 Takahashi 2.8-inch mount screws directly onto the 72mm male thread of the Mewlon series  telescopes and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver.Outside Diameter: 3 ... Learn More
    Model#: 17651
    $85.00

  20. Optec - TeleVue 3" male threaded mount for NP101 to OPTEC-2400 dovetail adapter.

    Optec - TeleVue 3" male threaded mount for NP101 to OPTEC-2400 dovetail adapter.

    The #17652 Televue 3-inch mount screws directly onto the NP101 male thread and presents the OPTEC-2400 dovetail for attachment of any device with an OPTEC-2400 receiver.Outside Diameter: 3.45" (87.6mm)Overall Height: 0.89" (22 ... Learn More
    Model#: 17652
    $95.00

Items 21 to 40 of 194 total

per page
Page:
  1. 2

Set Descending Direction

Optec, Inc. is located in Lowell, Michigan, just east of the Grand Rapids metropolitan area. For many years now the company has been in the forefront of research and development of astronomical, visibility, and video/CCD microscopy optical instruments for both amateurs and professional alike.

Optec was incorporated in 1979 and is the successor to DOAA Enterprises; a Detroit based company founded by an Oakland University college student, Gerald Persha. Under the leadership of Persha, Optec has grown from a small basement operation to a corporation employing 7 technicians, machinists, and sales staff. Optec's roots are founded strongly in astronomical research instrumentation with products such as the SSP line of solid-state photometers, photomultiplier tube and CCD photometers, the patented TCF- temperature compensated focuser and the recent addition of the Pyxis 3-inch, a high precision camera field rotator for large telescopes.

Optec has a support staff of many diverse and qualified individuals, who take great pride in their accomplishments at the company. 

Optec maintains and uses the Optec Observatory, a small observatory and testing laboratory for Optec's astronomical product line. Using a Meade 10" LX200 telescope and CCD cameras from SBIG. In addition to the Optec SSP single channel photometer line, the Optec Observatory is fully computer controlled with separate control room and observing deck. Recent additions to the observatory now allow remote operations of the telescope, photometer, and CCD camera control software. 

In addition to the astronomical product line, Optec designs and manufactures optical couplers for video/CCD microscopy, atmospheric visibility measuring instruments such as the Model LPV transmissometer and the NGN integrating nephelometer. These unique instruments are used to monitor the air quality in many of the national parks in the USA as part of the Improve Network.