Featured manufacturers
Shop By
Narrow Your Results
- Category
-
- Mounts (40)
- Accessories (94)
- CCD Cameras (15)
- Price
-
- $0.00 - $100.00 (65)
- $100.00 - $200.00 (37)
- $200.00 - $500.00 (13)
- $500.00 - $1,000.00 (7)
- $1,000.00 - $2,000.00 (9)
- $2,000.00 - $5,000.00 (10)
- 5000 and UP (2)
- Product Series
Losmandy
-
Losmandy - Celestron dovetail plate for 8", bolts to existing holes
Celestron dovetail plate for 8", bolts to existing holes.Wt. 1 lbs. Length 13.5" HS 12.325/12.70, Ht. top of tube to top of dovetail plate .5" Thickness ... Learn More
Model#: VCM8
$59.00 -
Losmandy - Clutch Knob Set 2 w/three, 3 Handles
Set (2) . R.A. and DEC. with (3) handles @ 30 degrees. For GM-8, G-9 and G-11 mounts. Makes clutch knobs easier to use, and gives greater clutching range ... Learn More
Model#: CKS
$125.00 -
Losmandy - Complete camera piggyback mount. Fits 7" Mac., Meade 10", new Celestron 9.25" and Celestron 11"
Complete camera piggyback mount. Fits 7" Mac., Meade 10", new Celestron 9.25" and Celestron 11" (C11 requires part # VCB11 if hole separation is 1.75" apart)Dovetail mounted ... Learn More
Model#: VPB17
$109.00 -
Losmandy - Complete camera piggyback mount. Fits Celestron 8 or Meade 8
Complete camera piggyback mount. Fits Celestron 8 or Meade 8 (C8 requires part # VCB8 if hole separation is 1.75" apart)Dovetail mounted. Slides from front to back of tube assembly for use with wide angle lens. No tools needed. Wt. 1.5 lbs. total ... Learn More
Model#: VPB13
$109.00 -
Losmandy - Complete Counterweight System
Dovetail mounted, dual axis movement, 2.5 lb weight. No tool operation. Wt. 4.2 lbs. total. Length 18.0" Mounts to existing holes ... Learn More
Model#: VSC11_M10
$118.00 -
Losmandy - Complete counterweight system. Fits 7" Mac., Meade 10", new Celestron 9.25" and Celestron 11"
Complete counterweight system. Fits 7" Mac., Meade 10", new Celestron 9.25" and Celestron 11" (C11 requires part # VCB11 if hole separation is 1.75" apart)Dovetail mounted, dual axis movement, 2.5 lb weight included ... Learn More
Model#: VWS17
$109.00 -
Losmandy - Complete counterweight system. Fits Celestron 8 or Meade 8
Complete counterweight system. Fits Celestron 8 or Meade 8 (C8 requires part # VCB8 if hole separation is 1.75" apart)Dovetail mounted, dual axis movement, 2.5 lb weight included. No tool operation.Wt. 4.0 lbs. total. Length 13.5" ... Learn More
Model#: VWS13
$109.00 -
Losmandy - Complete Piggyback Camera Mount System
Dovetail mounted. Slides from front to back of tube assembly for use with wide angle lens. No tools needed. Wt. 1.2 lbs. total. Length 17 ... Learn More
Model#: PBC11_M10
$100.00 -
Losmandy - Complete Piggyback Camera Mount System
Dovetail mounted. Slides from front to back of tube assembly for use with wide angle lens. No tools needed. Wt. 1.0 lbs. total. Length 13.5" Mounts to existing holes ... Learn More
Model#: PBC8_M8
$100.00 -
Losmandy - Counterweight Bracket 5 " threaded shaft and 2.5 Lb Weight
Dovetail adapter with a 5 inch long threaded stainless steel shaft and 2.5 lb weight. Mounts to D series dovetail plates, is used for the balancing of a fork mounted telescope. Wt. 3.5 lbs ... Learn More
Model#: DWS
$59.00 -
Losmandy - Curved Block Set- for all plates EXCEPT Meade 12"
Losmandy Curved Block Set For any plate Except Meade 12"Curved Block set to mount with any dovetail plate Except the Meade 12" plate ... Learn More
Model#: CB
$65.00 -
Losmandy - Curved Blocks For Meade 12" Plate
Losmandy Curved Block Set for Meade 12"Curved Blocks for Meade 12"Like all accessories in the Losmandy line, this curved block set is machined for lightness and rigidity from aluminum stock, then black anodized for a tough, corrosion free surface ... Learn More
Model#: CB12
Regular Price: $85.00
Special Price: $65.00
-
Losmandy - DAP4 - Dovetail Plate for Astrophysics 4 "
Will fit top or bottom of their rings. Wt. 2 lbs. Length 13.5" HS 12.325/12.70, Ht. top of rings to top of dovetail plate 1 ... Learn More
Model#: DAP4
$100.00 -
Losmandy - DAP5 - Dovetail Plate for Astrophysics 5 "
Will fit top or bottom of their rings. Wt. 2 lbs. Length 13.5" HS 12.325/12.70,Ht. top of rings to top of dovetail plate 1 ... Learn More
Model#: DAP5
$100.00 -
Losmandy - DAP6 - Dovetail Plate for Astrophysics 6 "
Will fit top or bottom of their rings. Wt. 2.5 lbs. Length 17.25" HS 16.0/16.50, Ht. top of rings to top of dovetail plate 1 ... Learn More
Model#: DAP6
$100.00 -
Losmandy - DAP7 - Dovetail Plate for Astrophysics 7 "
Will fit top or bottom of their rings. Wt. 2.5 lbs. Length 17.25" HS 16.0/16.50, Ht. top of rings to top of dovetail plate 1 ... Learn More
Model#: DAP7
$100.00 -
Losmandy - DC 9.25 - Dovetail Plate for Celestron 9.25 "
Dovetail plate for Celestron 9.25", bolts to existing holes. Wt. 3.5 lbs. Length 18.925" HS 17.25, Ht. top of tube to top ofdovetail plate 1 ... Learn More
Model#: DC9.25
$130.00 -
Losmandy - DC 9.25 N Dovetail Plate for Celestron 9.25"
Losmandy dovetail plate for Celestron 9.25".
... Learn MoreModel#: DC 9.25 N
$89.00 -
Losmandy - DC11 - Dovetail plate for Celestron 11 "
Celestron dovetail plate for 11", bolts to existing holes. Wt. 2.25 lbs. Length 17.25" HS 16.0/16.50, Ht. top of tube to top of dovetail plate 1.00" Thickness .6" ... Learn More
Model#: DC11
$89.00 -
Losmandy - DC14 - Dovetail plate Celestron 14 "
Dovetail plate for Celestron 14", bolts to existing holes. Wt. 3.75 lbs. Length 23.75" HS 23.00, Ht. top of tube to top ofdovetail plate 1 ... Learn More
Model#: DC14
$130.00
Losmandy, also known as Hollywood General Machining, has earned quite a reputation throughout the astronomical community for providing high-quality, precisely-machined German Equatorial mounts, dovetail plates, mounting rings, counterweight and piggyback systems, and other nicely done metal telescope accessories.
