Happily Serving You in the Same Location for Over 58 Years!

Welcome!

Jims Mobile, Inc. (JMI)

Items 21 to 40 of 321 total

per page
Page:
  1. 2

Set Descending Direction
  1. JMI - LNT Stabilizer for ETX-125

    JMI - LNT Stabilizer for ETX-125

    Meade ETX-125 PEThe metal stabilizer will help prevent the SmartFinder/LNT module from being broken or damaged ... Learn More
    Model#: BRKT125LNT
    $39.00

  2. JMI - NGC-MAX ROM Upgrade (v2.94)

    JMI - NGC-MAX ROM Upgrade (v2.94)

    The ROM (Read Only Memory) chip can be replaced to upgrade an NGC computer to the highest version number available for that particular series. For example, an NGC-MAX with a version 2.50 chip can only be upgraded to the highest 2.xx version ... Learn More
    Model#: NGCROM_2.94
    $39.00

  3. NGCROM

    JMI - NGC-MAX ROM Upgrade (v2.94)

    NGC-MAX ROM Upgrade (v2 ... Learn More
    Model#: NGCROM
    $39.00

  4. JMI - DC Power Cable for NGC-superMAX

    JMI - DC Power Cable for NGC-superMAX

    A 2.6m (8.5 ft) DC power cable for powering the NGC-superMAX from an 8 to 16 volt battery via a cigarette lighter adapter. Includes an adapter for connecting directly to battery posts with large alligator clips ... Learn More
    Model#: CBLDCSUP
    $39.00

  5. JMI - Mounting Bracket for NGC-MAX

    JMI - Mounting Bracket for NGC-MAX

    Standard accessory with every NGC-MAX computer. Also included with Encoder and Hardware or Hardware Only orders when specified for use with an NGC-MAX or compatible computer ... Learn More
    Model#: BRKTNGC
    $39.00

  6. JMI - Speed Dial Drill Adapter

    JMI - Speed Dial Drill Adapter

    The Speed Dial adapter fits into any portable drill. Place the claws of the adapter over the leveling screw handle and use the drill to quickly turn the screw up or down as necessary to level your Wheeley Bars.

    ...
    Learn More
    Model#: TPWSPDIAL
    $39.00

  7. JMI - Finder Bracket with Quick Release for Celestron 5 " to 11 " SCTs

    JMI - Finder Bracket with Quick Release for Celestron 5 " to 11 " SCTs

    This is a quick-release finder bracket for Celestron 5" to 11" SCTs ... Learn More
    Model#: BRKTPIFQR
    $39.95

  8. JMI - Serial Cable for LX200 PC Version

    JMI - Serial Cable for LX200 PC Version

    A 12 ft. cable for connecting an LX200 Computer Drive System to the 9 pin serial port of an IBM PC compatible. Includes a 9-to-25 pin adapter. Can be used with Meade LX200 / LXD600 / LXD700 / LXD650 / LXD750 ... Learn More
    Model#: CBLCDS
    $43.00

  9. JMI - Cassegrain Base for EV Focusers

    JMI - Cassegrain Base for EV Focusers

    Base for EV Focuser with 2 inch Cassegrain Thread ... Learn More
    Model#: EV-BASC
    $44.00

  10. JMI - Replacement Rechargable Battery for NGT18

    JMI - Replacement Rechargable Battery for NGT18

    The NGT-18 uses two 6 volt maintenance-free rechargeable batteries.

    ...
    Learn More
    Model#: BAT6V
    $45.00

  11. JMI - Extension Tube 1.25 " dia. x 1.6 " ht

    JMI - Extension Tube 1.25 " dia. x 1.6 " ht

    Extends the range of low-profile focusers. 1.25″ diameter x 1 ... Learn More
    Model#: ADPT1EXT
    $45.00

  12. ADPT3SCT

    JMI - Large Format SCT Visual Back Adapter- 3" dia. threads, no light shield

    Non-vignetting adapter for mounting an NGF-S or NGF-SE focuser on a 10″ or larger SCT with 3″ or 4″ diameter threads. An optional light shield blocks all stray light that may penetrate the focuser bearing cavity ... Learn More
    Model#: ADPT3SCT
    $45.00

  13. JMI - Extension Tube 2 " dia. x 1.5 " ht

    JMI - Extension Tube 2 " dia. x 1.5 " ht

    Extends the range of low-profile focusers. 2″ diameter x 1 ... Learn More
    Model#: ADPT2EXT
    $49.00

  14. JMI - SCT Threaded Output Adapter-2"

    JMI - SCT Threaded Output Adapter-2"

    Standard SCT threaded output for inserting into a 2" drawtube. (Standard accessory with a NGF-C(M) focusers ... Learn More
    Model#: ADPT2THREAD
    $49.00

  15. JMI - 1.25 " Eyepiece Adapter

    JMI - 1.25 " Eyepiece Adapter

    Adapter for inserting 1.25″ accessories in a 2″ drawtube. (Standard accessory with NGF-DX1, NGF-DX2 and NGF-DX3 focusers.)

    ...
    Learn More
    Model#: ADPT2-1.25
    $49.00

  16. JMI Hand Control Holder for NexStar

    JMI - Hand Control Holder for NexStar

    A snap-in bracket that holds the NexStar hand control where you can see it while using the scope.

    ...
    Learn More
    Model#: BRKTHUNEX
    $49.00

  17. JMI - Piggy-Back Camera Mount for 8 " to 11 " SCTs

    JMI - Piggy-Back Camera Mount for 8 " to 11 " SCTs

    Piggy-Back Camera Mount for 8″ to 11″ SCTsWill, in most cases, attach with the screws that are already present in the telescope′s optical tube ... Learn More
    Model#: BRKTPIGMNT
    $49.00

  18. JMI - Serial Cable for BBOX - PC version

    JMI - Serial Cable for BBOX - PC version

    A 12-ft. cable for connecting a BBOX or NGC-MAX to the 9-pin serial port of an IBM PC compatible or to an 8-pin DIN port on an Apple Macintosh ... Learn More
    Model#: CBLBBOX
    $49.00

  19. JMI - NGC-MAX ROM Upgrade (v3.xx)

    JMI - NGC-MAX ROM Upgrade (v3.xx)

    The ROM (Read Only Memory) chip can be replaced to upgrade an NGC computer to the highest version number available for that particular series. For example, an NGC-MAX with a version 2.50 chip can only be upgraded to the highest 2.xx version ... Learn More
    Model#: NGCROM_3.xx
    $49.00

  20. JMI - Battery Pack Holder

    JMI - Battery Pack Holder

    Add a Battery Pack Holder to Universal-Style Wheeley Bars for Orion Dynamo Power Supplies or other battery pack products. It will hold a battery up to 5-1/2" x 10" in size ... Learn More
    Model#: BRKTBP
    $49.00

Items 21 to 40 of 321 total

per page
Page:
  1. 2

Set Descending Direction

JMI Telescopes (Jim's Mobile, Inc.) is a world-renowned manufacturer of astronomical telescopes and after-market accessories for the amateur and professional astronomer.  We produce a variety of unique products that cannot be found anywhere else.  The founder and President of Jim's Mobile is Jim Burr.

Jim's philosophy is to create products that no others are selling.  "Our style is not to copy other companies, but to create unique products to solve problems.  If other companies are building good products, we are not going to compete with them.  We only take action when we see a need that no one is addressing.  In the case of our NGF focusers, even though there were many companies building focusers, we could find nothing that came close to zero image shift.  I thought the time had come to solve that problem."

"The development of the NGT line of telescopes, spanning more than a decade, has been very exciting for us here at JMI.  These telescopes represent a total departure from trends in commercial telescope making, and there is no doubt they have a bright future.  Our telescopes have received recognition in more than a dozen publications worldwide."