Adapter for inserting 1.25″ accessories in a 2″ drawtube. (Standard accessory with NGF-DX1, NGF-DX2 and NGF-DX3 focusers.)

Enhanced extension tubes include a compression ring and 48mm filter threads. 2" diameter x 2.13" height

Adapter for inserting 2 in. accessories in a 3 in. drawtube. The adapter uses a compression ring to secure inserted equipment. Shipping weight: approximately 1 lb. (Standard accessory with NGF-XT focusers.)

JMI 2.5 Drawtube

Add a Motor to any Universal-Style Wheeley Bars to create THE RIDE.

NOTE

The Motor Upgrade requires Universal-Style Wheeley Bars with the 10" Large Wheel Upgrade and a 12 volt Power Source. The Battery Pack Holder and Battery Pack (such as Orion's Dynamo Pro 17 Power Station) are optional but the motor requires a 12-volt power supply.

Add a Tow Handle to any Universal-Style Wheeley Bars.

NOTE

The tow handle is compatible with all Medium and Large Size Universal-Style Wheeley Bars. It is shown here attached to a Wheeley Bar unit. The 10" Pneumatic Large Wheel Upgrade (above) includes the Tow Handle.

For adding support when mounting 1.25″ or 2″ NGF or RCF focusers on cardboard tubes.

JMI - Base Adapter for Meade LXD75 SN

Battery Pack

This power pack is rated at 12 volts DC and 18 Amp Hours and includes a wall charger and padded carrying bag.

The case includes die-cut foam lining with compartments for telescope, eyepieces and accessories. The Star Pointer finder scope must be detached and inserted into a foam compartment. The case can be secured by placing a padlock around the two halves of the 7/8″ diameter handle.

This case is for the Optical Tube Assembly (OTA) ONLY. The case includes two lockable latches, three steel-reinforced handles, a 3″ by 30″ steel hinge and die-cut foam lining for the telescope optical tube. It can be carried by two people using the two handles on either end or pulled using the attached wheels.

Telescope carrying case for JMI - RB-66 Reverse Binoculars

The case includes six lockable latches, three steel reinforced handles, a 3″ by 24″ steel hinge and die-cut foam lining with compartments for binoculars, eyepieces and accessories. It can be carried or pulled using the attached wheels. The finder scope must be detached and inserted into a foam compartment.

Outside dimensions of the case are approximately 35-7/8″ x 28-1/8″ x 14″ and its empty weight is about 29 lbs.

The case includes six lockable latches for the removable cover (no hinge), two folding handle bars, four steel-reinforced handles and die-cut foam lining with compartments for telescope, eyepieces, finder scope (must be removed from the telescope and placed in a special vinyl cover included with the case) and accessories. The focuser does not need to be removed before installation. The top of the case is not hinged. It is removed completely to insert or remove the telescope. The case is designed to be maneuvered like a wheelbarrow with the two retractable handle bars and two 10″ pneumatic wheels. Installation of the wheels and support rails is easy and requires two 7/16″ wrenches (or two crescent wrenches). This case is compatible with Peterson ergonomic Get-A-Grip handles.

Outside dimensions of the case are approximately 51-5/8″ x 24-7/8″ x 19″ (assembled with handle bars retracted) and its empty weight is approximately 44.0 lbs. The shipping box is approximately 43-3/8″ x 14-3/4″ x 25-3/4″ (UPS Ground Oversized 2 rate is at 70 lbs) and the shipping weight is approximately 53.0 lbs. All values are subject to slight changes.