FLI Hyperion CCD47-10-1-109 deep depletion with 25mm or 45mm high speed shutter
FLI is pleased to release a third family of CCD Cameras, the Hyperion. The Hyperion Cooled CCD camera designed from FLI is designed for applications that require a thin profile without a sacrifice in performance or image quality. The Hyperion offers deep sensor cooling, high frame rates, low-noise and can accept a wide range of sensors including monochrome, front-illuminated, back-illuminated, interline and color.
One of the most excellent flexibilites an observer recieves when they purchase a Hyperion CCD is the choice between liquid or air cooling. Pre-cooling a CCD before usage is critical in the performance. Just like the MicroLine and ProLine series, these cameras include a TEC (Peltier) that assists in sensor cooling. Cooling of up to 70°C below ambient temperature is possible at a 20°C ambient with the standard fan assisted air cooled back. The Hyperion cooling system can improve cooling from 5-10°C and has the capabilites to take in approximate flow rates of 0.5 galloon/minute. The camera can reach proper temperature in 5 minutes!
FLI's Hyperion CCD Cameras can connect via USB 2.0 interface, 6 pin DIN auxiliary I/O, 12V power supply in. Simply connect the PC and camera via the USB cable and the 4 pin connector to a wall jsocket or AC power strap and the camera's fans will begin to run. If the observer wishes to connect the filter wheel, FLI has a cable kit available to buy seperately.
The camera sereis also incorporates RBI Anti-Ghosting Technology. This technology eliminates ghost images common to front illuminated full frame cameras. This feature is directly controlable from the computer and the user can turn it on or off according to his or her preference. This feature was developed by FLI and is madem possible with newly advanced software, firmware and hardware.
The MicroLine and ProLine cameras are well known for their blazing download speeds. FLI has now brought this trait to the Hyperionn series. With a speed of 12MHz at 16 bits, images can be downloaded to the PC in approximately 1 second with a full frame sensor operation. In addition, the CCD has a video mode with interline sensors, meaning you can viewn your images live!
|Manufacturer||Finger Lakes Instrumentation|
|CCD Type||Back Illuminated|
|Computer Interface||USB 2.0>|
|Cooling||60ºC Below Ambient|
|Dark Current||14 e-/pixel/sec @ -40ºC|
|Digitization Speed||700 kHz, 2 MHz (up to 4 MHz available)|
|Dimensions||4.0 x 6.75 x 3.35 (101.6 x 171.5 x 85.1)|
|Environment||-30ºC - 45ºC | 10% - 90% Relative Humidity|
|Full Well Capacity||100,000 e-|
|Lens Mounts||C-Mount, F-Mount|
|Pixel Size||13 μm|
|Power Requirements||12V (100-240V AC to 12V DC power supply included). With TEC off: <1A. TEC at 100%: 4.4A. (Optional Electromechanical Shutter open: 4A pulse for 100msec. Shutter held open, add 0.22A.)|
|Sensor Diagonal||18.8 mm|
|Sensor Type||E2V CCD47-10-1-109|
|Typical System Noise||9 e- RMS @ 1 MHz|
|Video Size||1.2 inches|