Happily Serving You in the Same Location for Over 58 Years!

Welcome!

PetersonEng - Bucks PRECISION Gears - For 7, 8, 10 or 12 " LX200-ACF or LX200GPS

Model#: BuckGears

Be the first to review this product

Availability: In stock

$106.99

OR
Manufactured by: Peterson Engineering

PetersonEng - Bucks PRECISION Gears - For 7, 8, 10 or 12 " LX200-ACF or LX200GPS

Details

If your 7", 8", 10" or 12" Meade LX200GPS was manufactured before August 2005 the odds are 95 in 100 that it has molded plastic transfer gears in the drive train. Replace these plastic gears with precision machined high strength stainless steel gears. This kit not only upgrades the transfer gears; it addresses and tunes the full mechanical drive system for both axes.

Due to the failures and inaccuracies associated with the plastic transfer gears, Meade converted to precision brass transfer gears some time in August 2005. If your scope has brass gears, you shouldn't need the gears in the Buck's Gears kit. However, note that at least 50% of the tracking improvements associated with Buck's Gears kit are related to the many fine adjustments to your drives that are part of the Buck's Gears kit. As an example of an adjustment - Meade's brass gears may have been machined precisely, but that precision counts for nothing unless they're properly meshed. Meade's assembly line has no way of adjusting for proper mesh and they ship with some gears that are barely cogging (just touching tip of tooth to tip of tooth). If your scope is equipped with brass transfer gears the Buck's Drive Tune-Up kit will allow you to tune your scope to its full mechanical precision limits. If you're unsure at to whether you've got plastic or brass transfer gears call us.

Installation of this kit will:

1) improve the drive precision in both RA and DEC drives, reducing or eliminating transfer gear backlash.

2) eliminate the tendency of teeth to break or strip off of the plastic gears when slewing the telescope at high speed or in cold temperatures.

3) eliminate the tendency of the gears to loosen on their axle, due to use of a larger securing bolt capable of much higher locking torque.

The kit consists of detailed step-by-step photo illustrated instructions for the declination and the azimuth drives, 4 precision stainless steel gears, special gear grease and 4 hex wrenches. And to correct those scopes where the gears do not mesh closely but are only touching tooth tip to tooth tip in a cogging kind of action, the kit also includes a drill bit and 2 special spacer bushings.

These gears were originally developed by Buck Harley. Many LX200GPS users know Buck from Yahoo's LX200GPS group. Buck did the development groundwork strictly on his own for the good of the astronomical community. He offered his gear design to PE Corp. with no compensation to himself simply because of our distribution ability and our experience with this type of a kit.

Although the instructions provided are crystal clear, the installation of this kit is slightly more complex than that of the EZ Focus kit or the EZ Clutch kit. If you had trouble with either of our other kits, or if you consider yourself to be a klutz, please either do not buy this kit or arrange for someone else to perform the installation for you.

Additional Information

Name PetersonEng - Bucks PRECISION Gears - For 7, 8, 10 or 12 " LX200-ACF or LX200GPS
Manufacturer Peterson Engineering
Model BuckGears