Happily Serving You in the Same Location for Over 58 Years!

Welcome!

Baader Planetarium - Glasspath Corrector 1.25X for Maxbright

Model#: GLASS-1

Be the first to review this product

Availability: In stock

$118.00

OR
Manufactured by: Baader Planetarium

Details

Baader Planetarium Glasspath Corrector 1.25X for Maxbright


The Baader Glasspath Compensator serves multiple functions. In addition to correcting the color error caused by the long light-path through the binoviewer glass prisms (glasspath), the compensator also magnifies and extends the focal point of the telescope. This focal extending aspect is key to being able to use a binocular viewer in most telescopes. Due to the basic design of all binocular viewers, the distance that light must travel through the viewer is on the order of 4.5" or more (the Maxbright is the shortest viewer we know of, at 110mm). Many telescopes, especially Newtonians, do not have sufficient back-focus in order to reach focus with such an optically long accessory (ie, not enough focuser in-travel). By using a Baader compensator, the focal point of the telescope can be extended sufficiently to accommodate the length of the binoviewer.

A secondary benefit of the compensator is to provide additional magnification - ahead of the binoviewer. For high magnifications (ie, planetary observation), it is generally preferable to magnify the image before the binoviewer, rather than to use shorter focal length eyepieces. By magnifying prior to the viewer, the effects of any optical tolerances and misalignments in the centering of the eyepieces are reduced. A compensator enables the use of longer focal length eyepieces to achieve high magnifications, which tend to have longer eye relief (greater comfort) than short focal length eyepieces. It is also less expensive to purchase an additional compensator (to provide additional magnifications), rather than to purchase additional sets of eyepieces. In general, for binoviewing use we recommend eyepieces with focal lengths of 8mm or longer.

For these reasons, many users find it is very useful to have more than one compensator. We recommend first choosing the lowest powered compensator that will allow your scope to reach focus. This will permit the widest possible fields of view. In addition, one or more higher powered compensators can be added to give a greater range of magnifications.

 

 

 

 

 

 

mw

Product Series

Baader Planetarium has designed a new optimized telecentric system for use with Solar Spectrum H-Alpha systems. A telecentric system is used to convert shorter focal ratio telescopes to the desired f/25 or greater beam needed by the rear mounted Solar Spectrum filter. More than a barlow lens or barlow lens based system, the Baader telecentric ensures that the output beam maintains a consistent normal incident angle across the full filter width. The result is a consistent bandwidth and high image contrast across the field of view. This lens system has been optimized to maintain an exceedingly high optical quality for dedicated solar use (>99% strehl at 656.3nm). Simpler barlow or barlow-based systems are not able to produce this level of accuracy or telecentricity. Hard Dielectric IR coatings further help to reject IR energy and protect the rear etalon from excessive heat energy.

Additional Information

Name Baader Planetarium - Glasspath Corrector 1.25X for Maxbright
Manufacturer Baader Planetarium
Model GLASS-1