Happily Serving You in the Same Location for Over 58 Years!

Welcome!

ATIK - 383L+ CCD Camera - Kodak KAF-8300 Monochrome Sensor

Model#: ATK0067

Be the first to review this product

Availability: In stock Available

Regular Price: $1,995.00

Special Price: $1,880.00

Available

FREE SHIPPING (48 States)
OR
Manufactured by: Atik  Cameras

Details

 

 The new Atik 383L+ is an 8 million pixel camera using the Kodak KAF-8300 Full Frame CCD.  Much has been written about this CCD establishing it as one of the pre-eminent astro-imaging chips on the market. Reasonable cost, versitility, exceptional accuracy, low noise, and reliability all add up to a perfect match for the Atik 383L+ camera.  This combination of camera and sensor has redefined mid-range astro-imaging, making multi-megapixel cooled cameras much more accessible.

 Atik has always concentrated on providing cameras offering the very highest image quality at a reasonable cost  .Nothing has changed  They have built on the success of the highly-regarded Atik 314 platform to support Kodak's KAF-8300. The Atik 383L+ is a dream combination of low-noise electronics and a scientific grade sensor that is available at a fantastic price.  This immediately offers a huge number of advantages, including the very low read-noise circuits and the reliability of using this established design.

The KAF-8300 Image Sensor is a 22.5mm diagonal (Four Thirds Format) high performance color or monochrome full frame CCD (charge-coupled device) image sensor designed for a wide range of image sensing applications including digital imaging. Each pixel contains blooming protection by means of a lateral overflow drain thereby preventing image corruption during high light level conditions. For the color version, each of the 5.4µm square pixels are patterned with an RGB mosaic color filter with overlying microlenses for improved color response and reproduction. Several versions of monochrome devices are available with or without microlenses.The sensor utilizes the TRUESENSE Transparent Gate Electrode to improve sensitivity compared to the use of a standard front side illuminated polysilicon electrode.The TRUESENSE Transparent Gate Electrode significantly improves the sensitivity available from front-illuminated Full Frame CCD devices by increasing the amount of light entering the pixel for detection.In a Full Frame CCD design, each pixel is covered by electrodes which allow charge to be read out of the device – as different voltages are applied to the electrodes, charge is “pushed” from pixel to pixel and then into the readout register.  In standard semiconductor manufacturing, these electrodes are manufactured from polysilicon, which absorbs light and reduces the overall sensitivity of the pixel.  The TRUESENSE Transparent Gate Electrode is manufactured using a different material – Indium Tin Oxide (ITO) – which is not only electrically conductive but also optically transparent, allowing light to enter the pixel without obstruction.

With this ITO electrode design, devices that utilize the TRUESENSE Transparent Gate Electrode have significantly higher sensitivity compared to devices that only use polysilicon electrodes:  Sensitivity at 400 nm is improved by a factor of 10, and increased by 50% across the majority of the visible spectrum.

 The key to any high-quality camera is the ability to convert light collected by the sensor into digital information, while ensuring that as little noise as possible is added. The digital image needs to truly reflect the light collected. The Atik 383L+ achieves this, having:

  • Very low read-noise, 7 electrons, on a par with many Sony sensors, enabling faint details to be detected.
  • Great linearity, with a regression correlation coefficient of R = 0.9998 over the range 1,000 to 64,000, making the camera suitable for sensitive photometric measurements.
  • The bias frame histogram from the camera shows the ideal Gaussian shape, indicating that maximum detail can be extracted upon processing
  • System requirements: Pentium III PC with 128MB RAM, Windows XP/Vista/Win7/Win8 (not RT), CD-ROM drive and USB 2.0 port


 .

                                                                       KAF-8300 Image Sensor

                                                                   TrueSense Kodak KAI-8300 Full Frame Sensor (mono)

 

 

                                                       

 

 

 

 

 

 

 

mc

Additional Information

Name ATIK - 383L+ CCD Camera - Kodak KAF-8300 Monochrome Sensor
Manufacturer Atik Cameras
Model ATK0067
Custom Stock Status Available
ADC (analog to digital converter) 16-bit
Cooling ∆T = -40˚C max
Interface USB 2.0 High-Speed
Pixel Size 5.40µm x 5.40µm
Power Supply 12V DC
Read Noise Typical 7e-
Resolution (Horizontal) 3362 pixels
Resolution (Vertical) 2504 pixels