Order By Phone
STORE FRONT: 5348 Topanga Canyon Blvd, Woodland Hills CA 91364


Astrozap - Flexi-Heat Celestron 6 SE Dew Shield


Be the first to review this product

Availability: In stock In Stock

Only 1 left


In Stock

Manufactured by: AstroZap


AstroZap Dew Shield for Celestron 6 SE Telescope

  • Works great with the Celestron 6 SE Telescope
  • Provides evenly distributed heat
  • Uses a maximum of 0.5 amps of power
  • Includes a 6 ft phono-plug cable
  • Compatible with a diverse range of controllers
  • Equipped with ABS plastic


Compatible with the Celestron 6 SE Telescope, this dew shield by AstroZap secures your telescope's optics from dew. Built with ABS plastic with an outer black coating exterior, the AstroZap Dew Shield is capable of absorbing both moisture and light. For extra durability, the dew shield has velcro pre-sewn in place.

The heater strip draws only 0.50 amps at full power (although power consumption at normal operating levels will generally be considerably less, particularly with the heat-conserving properties of the dew shield itself). It has a permanently attached 6? power cord terminated by a male RCA plug for connection to an optional (but required) heater control unit.

Most previous older dew shields only prolonged the effect of dew formation. However, with a minimal addition of heat even in drier climates, dew formation is guaranteed not to be a burden on your optics. The heat is generated through thick film heater at 12 volts with a 60% surface area emitting heat. Therefore, instead of heat distributed unevenly raising temperature considerably, heat is evenly distributed for a reasonable temperature and prevention of burnouts with wire resistance.  In addition, no heat wave disturbances will be caused.

Astrozap's Flexi-Heat Dew Shields come with a six foot phono-plug cable and are compatible with Thosand Oaks, Kendrick and Dew Buster controllers. Optional cigarette lighter adapters are available for use without controllers. Being compatible with a wide diverse of products, the AstroZap won't restrict you from using your optics any differently than before.

The Astrozap Flexi-Heat Dew Shields are made from durable yet light weight ABS plastic and lined with black felt to help increase contrast. A 2-inch sewn neoprene rubber Mega Grip material wraps snugly around the telescope optical tube assembly, keeping the dew shield in place, and eliminating any chance of dew formation!

Product Series

Flexible Dew Prevention Shields! Introducing the ultimate flexible dew shield that lays flat or rolls up for easy storage.

Flexible dew shields are made of lightweight durable black ABS plastic. The interior is felt-lined to help absorb moisture and to prevent extraneous light from reaching the optics. Sewn Velcro strips facilitate quick wrap-around placement onto the corrector plate rim. A two-inch rubber trim also wraps around the OTA to prevent any slippage. The best advantage of the Flexible Dew Shield is that it lays flat or rolls up for easy storage.

Additional Information

Name Astrozap - Flexi-Heat Celestron 6 SE Dew Shield
Manufacturer AstroZap
Model AZ-816
Manufacturer Part No AZ-816
Custom Stock Status In Stock