Happily Serving You in the Same Location for Over 58 Years!

Welcome!

Optec - Pyxis STL camera mount with OPTEC-2300 male dovetail.

Model#: 17644

Be the first to review this product

Availability: In stock

$59.00

OR
Manufactured by: Optec

Optec - Pyxis STL camera mount with OPTEC-2300 male dovetail.

Details

#17644 - Pyxis STL camera mount. The SBIG STL camera is one of the largest cameras that can be attached to the Pyxis. Unlike the more common ST-X cameras with the T-thread mount, this camera requires a special mounting plate that is attached to the camera by means of 4 socket cap screws that screw directly into the camera front plate.

Product Series

The OPTEC-2300 circular dovetail mount is used by NextGEN line of telecompressors, the Pyxis 2-inch camera field rotator, the IFW 2-inch filter wheel, and the Perseus 4-port Instrument Selector.

 

These mounts allow easy connections from any of these devices to a variety of camera mount.   One side of each adapter below has the Optec 2.3" dovetail mount and the other side presents a camera specific mount, such as the T-thread, or C-mount.  If your camera or accessory is not listed, do not hesitate to call.  We are constantly adding new adapters to our catalog.

Each camera mount below is held in place with three setscrews and can be adjusted a full 360-degrees for best rotational alignment.

Additional Information

Name Optec - Pyxis STL camera mount with OPTEC-2300 male dovetail.
Manufacturer Optec
Model 17644