Happily Serving You in the Same Location for Over 58 Years!

Welcome!

Optec - Pyxis QSI Camera Mount.

Model#: 17643

Be the first to review this product

Availability: In stock

$60.00

OR
Manufactured by: Optec

Details

OPTEC - Pyxis QSI 4-Bolt Camera Mount

The  QSI 4-Bolt mount attaches directly to QSI camera systems and presents an OPTEC-3000 dovetail for attaching devices with an OPTEC-3000 receiver.
The mount allows easy connections from any of these devices to a variety of camera mounts. One side of the adapter has the Optec 2.3" dovetail mount and the other side presents a camera specific mount, such as the T-thread, or C-mount.Each camera mount is held in place with three setscrews and can be adjusted a full 360-degrees for best rotational alignment

                                      QSI Camera Mount

 

 

Product Series

The OPTEC-2300 circular dovetail mount is used by NextGEN line of telecompressors, the Pyxis 2-inch camera field rotator, the IFW 2-inch filter wheel, and the Perseus 4-port Instrument Selector.

 

These mounts allow easy connections from any of these devices to a variety of camera mount.   One side of each adapter below has the Optec 2.3" dovetail mount and the other side presents a camera specific mount, such as the T-thread, or C-mount.  If your camera or accessory is not listed, do not hesitate to call.  We are constantly adding new adapters to our catalog.

Each camera mount below is held in place with three setscrews and can be adjusted a full 360-degrees for best rotational alignment.

Additional Information

Name Optec - Pyxis QSI Camera Mount.
Manufacturer Optec
Model 17643