The Train-n-Track (TNT) system is a basic alt-az motor drive system with adjustable or trainable
tracking. A simple one-minute training procedure allows the scope to track for 10 minutes or more.
Losmandy - EXHDAH - EXHD Tripod Legs Only adjustable 33" - 54" vertical height to top of tripod. Leg clamps to lock to mini pier have to be ordered separately.Wt. 39 lbs. Set (3)
This upgrade kit modifies the declination clutch system on Meade RCX400, LX200GPS, LX200R and LX90
families of telescopes. When installed, lightly tightening the clutch knob with two fingers is all that
is required to hold even the most unbalanced scope firmly in position. You'll no longer have to turn
the declination knob uncomfortably tight or risk having your knob popping off as you tighten it to it's
breaking point. With the EZ Clutch you have enough "feel" that can easily dial in enough declination
tightness to hold the optical tube firmly but still allow the drive to slip if you hit an end stop or
an obstruction.
This kit is intended for use with all Meade 7" through 12" Schmidt-Cassegrain and Maksutov-Cassegrain
telescopes - including the LX200GPS, the LX200 Classic, the LX90, the LX50 and the LX10. It also fit
the LX200R 8", 10" and 12" scopes, as well as the 16" LX200R and LX200GPS. The kit removes most of the
backlash in Meade"s focusing system and consistently provides a light precise feel to the focuser knob.
