TeleVue - Focusmate™ Driver For left-hand Focusmate Driver install on all 4" or 5" Tele Vue scopes.

For visual or CCD use, focusing a Tele Vue telescope can now be smoother, more
accurate and vibration – free when you add the Focusmate plus the new
Focusmate Driver (FDR-2001 or FDL-2002). This adjustable speed electric motor
drive installs easily onto the Focusmate 6:1 fine focus unit, and offers a
unique quick disconnect for switching (without tools) between electric and
manual operation.
If the Digital Micrometer Kit (DMK-0002), is also installed, measurement is possible to an
unprecedented .0001” (1/10,000”). A gentle tap on the motor direction switch can produce steps as
small as about .0005” (5/10,000”).

All Tele Vue scopes having focusing knobs with 5 holes will accept the Focusmate 6:1 reducer and
the Focusmate Driver. All current production Tele Vue scopes from the TV-76 through NP-127 now
accept the Digital Micrometer Kit, as well, so that their fullest imaging and visual performance
can be realized. Truly, focusing will be “even better than you imagined.”

	

For left-hand Focusmate Driver install on all 4” or 5” Tele Vue scopes. Also used on TV60is,
TV-76, TV-85 where it is attached to a Focusmate mounted on the right-side. On TV-76 and TV-85
this maintains full forward telescope positioning in the ring mount for balancing (APB-1008
balance aid is recommended).