Takahashi - EM-200 Temma II Mount for Low Latitudes (0º to 50º)

*  The 700X GOTO version of the EM-200, but especially made for latitudes below 23º.

*  Latitude scale from 0º to 50º. 

*  A beefy, beautifully made mount with the addition of GoTo functions (PC required).

*  Includes standard hand controller, cables, and software, but not tripod. 

*  Weight Capacity is 40 lbs. 

This mount is the same as the standard EM-200 Temma II, except it is made for folks in lower
latitudes. Latitude range is 0º to 50º.

The EM-200 Temma II is an accurate, precision-built GoTo German equatorial mount that provides a
stable platform for payloads of up to 40 pounds. It is an ideal mount for any type telescope, be
it a refractor, reflector, or cassegrain.

The modern aesthetic design of the EM-200 is highly attractive as well as beautifully functional.
The RA and DEC stepper motors are fully integrated into the mounting,and the high precision design
and construction provides cyclic errors lower than +/- 5 arc seconds.

The integrated polar alignment telescope has an illuminated reticule which can be dimmed to suit
the user or observing conditions. In conjunction with the precision altitude and azimuth
adjusters, this will typically give polar alignment accuracy within 2 minutes of arc of the
celestial pole.

Included in this package are an RS232C cable, ST-4 or ST-7 cable, shaft encoders, hand
controller, power cord for both 12V and 24V operation, and software.

The new style EM-200 mounts include the ability for operation on 12v or 24v and feature high
speed slewing at 350x [sidereal rate] at 12v and 700x at 24v. 12V operation takes place with the
use of the hand controller only. The mount will then function just like the EM-200 USD model (no
GoTo functions). However, with the use of the hand controller and your PC, you can operate with
12V or 24V (two 12V batteries connected in series). 12V will give you a slewing speed of up to
350X sidereal, and 24V will produce slew speeds of up to 700X. A hand controller and power cable
for 12V/220V battery connection is included. A PC is required for GoTo operations.

Image shows standard EM-200 Temma II mount.