Click here for recommended accessories

Pier-Tech Inc. - Tri-Pier2 Height Adjustable portable telescope pier

Tri-Pier 2 portable height adjustable telescope pier. The most versitile telescope pier ever! A
powerhouse pier, adaptable to different viewing platforms, both portable and permanent. Loaded
with features, and the same patented height adjustment technology found in the world popular
Pier-Tech 2 and Pier-Tech 3 Telescope piers.

The Tri-Pier2 is a portable ,height adjustable, telescope pier that folds up like a traditional
tripod. It allows a lower loading height, at knee level, of your mount and telescope. After
loading your astronomy equipment, simply push a button to raise your mount and telescope to a
comfortable viewing/working height.

The pier has 20 inches of precision vertical adjustment keeping your telescope polar aligned and
level at every height. It is supplied with a 24 volt rechargeable battery controller, so you can
take it to your favorite dark sky site or star party. It can also be mounted in your observatory
or permanent viewing site, by adding the optional anchor plate.

Features of the Tri-Pier 2 Portable Telescope Pier

Supplied with 24volt rechargeable battery controller.

Stays level and polar aligned at every height.

400 pound lift capacity

The minimum pier height can be set between 28 inches and 38 inches, maximum pier height is
electrically adjustable between 28 to 48 inches or 38 to 58 inches, depending on what height you
set the minimum to. So if you currently have a short telescope such as a SCT, and in the future
go to a longer telescope such as a refractor, the minimum height can be set to suit either
application.

Aluminum anodized construction for corrosion resistance.

Audible alarm lets you know if batteries need recharging.

Bull’s-eye level is recessed in bottom ring. This feature aids in leveling the pier.

Carry Handle

Special slots in side of pier allow you to hide wires by adding our slot covers.

3” diameter vibration resistant foot pads for maximum ground contact.

Gas assisted leg opening. This feature aids in opening the legs and allows the legs to open to
the same position, so if you place it in the same place and in the same orientation, on your
viewing platform, you won’t have to re-level the pier.

Custom machined top plate for your mount type is included in price. Adaptable to any telescope
mount. Lifting capacity allows use with any commercially available telescope mounts.

Ergonomic and handicapped accessible.

Great for viewers of different standing height.

The Tri-Pier2 can be converted to a permanent height adjustable pier by removing adjustment feet
from legs. No need to remove the legs. Just fold them in. So if an observatory is in your future
or if you are looking for a pier that can be used both in an observatory permanent setting and at
your favorite star party, then the Tri-Pier2 is the pier that will adapt to your needs.

Lower minimum heights are available on special order.