JMI - Carrying Case for Meade 12 inch LX200, LX200GPS, LX200-ACF, & 10 inch LX400

JMI Carrying Cases include crush-resistant die-cut foam, contoured to safely hold your telescope during transport. The larger
cases are manufactured by JMI with 1/4″ plastic for super strong support. Most cases include an extra handle on one end with
wheels on the opposite end for easily maneuvering the case without lifting the entire weight. These attractive and efficiently
designed cases are substantially smaller than the original shipping box and even smaller than most soft cases. They protect your
investment while making it easier to move your scope from one location to another.

Telescope carrying case for Meade - LX200 (non-GPS) 12, LX200GPS 12, LX200-ACF 12, LX400 10″

The case includes six lockable latches for the removable cover (no hinge), two folding handle bars, four steel-reinforced handles
and die-cut foam lining with compartments for telescope, eyepieces, finder scope (must be removed from the telescope and placed in
a special vinyl cover included with the case) and accessories. The focuser does not need to be removed before installation. The
top of the case is not hinged. It is removed completely to insert or remove the telescope. The case is designed to be maneuvered
like a wheelbarrow with the two retractable handle bars and two 10″ pneumatic wheels. Installation of the wheels and support
rails is easy and requires two 7/16″ wrenches (or two crescent wrenches). This case is compatible with Peterson ergonomic
Get-A-Grip handles.

Outside dimensions of the case are approximately 51-5/8″ x 24-7/8″ x 19″ (assembled with handle bars retracted)
and its empty weight is approximately 44.0 lbs. The shipping box is approximately 43-3/8″ x 14-3/4″ x 25-3/4″
(UPS Ground Oversized 2 rate is at 70 lbs) and the shipping weight is approximately 53.0 lbs. All values are subject to slight
changes.