TeleVue - Focusmate™ Driver For left-hand Focusmate Driver install on all 4" or 5" Tele Vue scopes.

For visual or CCD use, focusing a Tele Vue telescope can now be smoother, more accurate and vibration – free
when you add the Focusmate plus the new Focusmate Driver (FDR-2001 or FDL-2002). This adjustable speed
electric motor drive installs easily onto the Focusmate 6:1 fine focus unit, and offers a unique quick
disconnect for switching (without tools) between electric and manual operation.
If the Digital Micrometer Kit (DMK-0002), is also installed, measurement is possible to an unprecedented .0001" (1/10,000"). A
gentle tap on the motor direction switch can produce steps as small as about .0005" (5/10,000").

All Tele Vue scopes having focusing knobs with 5 holes will accept the Focusmate 6:1 reducer and the Focusmate Driver. All
current production Tele Vue scopes from the TV-76 through NP-127 now accept the Digital Micrometer Kit, as well, so that their
fullest imaging and visual performance can be realized. Truly, focusing will be "even better than you imagined."

	

For left-hand Focusmate Driver install on all 4" or 5" Tele Vue scopes. Also used on TV60is, TV-76, TV-85 where it is attached to
a Focusmate mounted on the right-side. On TV-76 and TV-85 this maintains full forward telescope positioning in the ring mount for
balancing (APB-1008 balance aid is recommended).