ImageSource - Cable connecting two 6-pin IEEE 1394 devices, length 1.80m

Connects an Astro CCD Camera to a 4 Pin FireWire Connector

    * Connects IEEE 1394a devices
    * Connector 1 : 6-pin IEEE 1394a
    * Connector 2 : 6-pin IEEE 1394a
    * Length : 1.8 m

Cable for computers with 6 pin FireWire connector

Using this cable, you can connect The Imaging Source astronomy cameras to any computer that is fitted with a 6 pin FireWire
connector. Typically, 6 pin connectors are found on desktop computers. Furthermore, some laptops also have one built in or can be
added later using a FireWire PC card.

In the case of a laptop, please take care to check whether the 6 pin FireWire connector supplies power. This is not always the
case. Should you require an external power supply, ensure that it can deliver between 8 and 30 VDC. The Imaging Source telescope
cameras require 12 VDC and around 200 mA. Also take note of specific manufacturer directions.